Oppo U701 spare parts

Technical Characteristics of Oppo U701 Repuestos

The Oppo U701 is a robust smartphone model that features various replaceable components to ensure longevity and optimal performance. The technical characteristics of Oppo U701 repuestos (spare parts) are detailed below:

1. Display Screen

• Type: IPS LCD, capacitive touchscreen, 16M colors
• Size: 4.5 inches, 55.8 cm2 (~64.3% screen-to-body ratio)
• Resolution: 540 x 960 pixels, 16:9 ratio (~245 ppi density)
• Protection: Corning Gorilla Glass 2

2. Battery

• Type: Li-Ion 1710 mAh, non-removable

3. Camera Module

• Main Camera: 5 MP, AF
• Features: LED flash, HDR
• Video: 720p@30fps
• Front Camera: VGA

4. Internal Components

• Chipset: Mediatek MT6577
• CPU: Dual-core 1.0 GHz Cortex-A9
• GPU: PowerVR SGX531u
• Memory: 4GB internal storage, 1GB RAM

Instructions on How to Replace Oppo U701 Repuestos

Replacing components of the Oppo U701 requires careful steps to avoid damage to the device. Below are detailed instructions for replacing the key repuestos of the Oppo U701:

1. Replacing the Display Screen

• Turn off the Oppo U701 and disconnect it from any power source.
• Remove the SIM card tray using a SIM ejector tool.
• Use a plastic opening tool to gently pry open the back cover of the phone.
• Carefully disconnect the battery connector to avoid any electrical damage.
• Unscrew the screws securing the internal frame using a precision screwdriver.
• Detach the connectors attached to the motherboard carefully.
• Use a heat gun to soften the adhesive around the display screen.
• Gently pry the display screen from the frame starting from one edge.
• Align the new display screen and press it firmly into place.
• Reconnect all the internal connectors and reassemble the phone by reversing the steps.

2. Replacing the Battery

• Turn off the device and unscrew the back cover screws.
• Use a plastic opening tool to remove the back cover.
• Disconnect the battery connector from the motherboard.
• Carefully remove the battery by lifting it from the adhesive holding it in place.
• Place the new battery and connect it to the motherboard.
• Reattach the back cover and secure it with screws.

3. Replacing the Camera Module

• Power off the Oppo U701 and remove the back cover.
• Disconnect the battery to avoid any short-circuit.
• Locate the camera module on the motherboard.
• Carefully disconnect the camera module connector.
• Remove the screws securing the camera module if applicable.
• Gently lift and remove the old camera module.
• Position the new camera module and secure it in place.
• Reconnect the camera module connector to the motherboard.
• Reassemble the phone by reversing the earlier steps.

By following these detailed instructions, you can replace the key components of the Oppo U701 efficiently and effectively. Ensure to handle all parts with care to prevent any further damage to the device.