Oukitel C12 Pro spare parts

Technical Characteristics of Oukitel C12 Pro Repuestos

The Oukitel C12 Pro is a budget-friendly smartphone with a variety of replaceable components designed to extend its longevity. Below are the key technical characteristics of its repuestos (spare parts):

Screen

• Type: LCD capacitive touchscreen
• Size: 6.18 inches
• Resolution: 480 x 996 pixels

Battery

• Capacity: 3300 mAh
• Type: Li-ion removable

Camera

• Rear Camera: 8 MP + 2 MP
• Front Camera: 5 MP

Other Components

• Chipset: MediaTek MT6739
• Memory: 2GB RAM, 16GB internal storage (expandable via microSD)
• Operating System: Android 8.1 (Oreo)

Instructions for Replacing Oukitel C12 Pro Repuestos

Tools Needed

• Plastic opening tools
• Phillips screwdriver
• Spudger
• Tweezers

Steps to Replace the Screen

Note: Power off the device before beginning any repair.

• 1. Remove the back cover by prying it off with a plastic opening tool.
• 2. Take out the battery to access the screws.
• 3. Use a Phillips screwdriver to remove all visible screws securing the midframe to the front assembly.
• 4. Separate the midframe from the front assembly using a spudger, being careful not to damage any connectors.
• 5. Disconnect the display connector from the motherboard using tweezers.
• 6. Replace the damaged screen with a new display by aligning it properly and connecting it back to the motherboard.
• 7. Reassemble the device by reversing the steps above.

Steps to Replace the Battery

• 1. Remove the back cover using a plastic opening tool.
• 2. Carefully take out the battery from its compartment.
• 3. Insert a new battery, making sure it is properly aligned and seated.
• 4. Replace the back cover by pressing it firmly into place.

Steps to Replace the Camera

• 1. Remove the back cover and the battery as previously described.
• 2. Unscrew all visible screws with a Phillips screwdriver to detach the midframe.
• 3. Separate the midframe using a spudger.
• 4. Locate and disconnect the camera module connector from the motherboard.
• 5. Carefully remove the old camera module and replace it with a new one.
• 6. Reconnect the camera module to the motherboard.
• 7. Reassemble the device by reversing the disassembly steps.