Oukitel C12 spare parts

Technical Characteristics of Oukitel C12 Repuestos

Repuestos (spare parts) for the Oukitel C12 are essential for the maintenance and repair of the device. Below are the primary components available as repuestos for the Oukitel C12, along with their technical specifications:

1. Screen

Type: LCD Capacitive Touchscreen

Size: 6.18 inches

Resolution: 480 x 996 pixels

2. Battery

Capacity: 3300mAh

Type: Li-ion Non-removable

Voltage: 3.8V

3. Charging Port

Type: Micro USB 2.0

4. Rear Camera Assembly

Primary Camera: 8MP

Secondary Camera: 2MP

Features: LED flash, HDR, panorama

5. Front Camera

Camera: 5MP

Instructions on How to Replace Oukitel C12 Repuestos

Step-by-Step Instructions

Follow these detailed steps to replace spare parts in the Oukitel C12. Make sure you have the necessary tools, such as a plastic prying tool, screwdriver, tweezers, and replacement parts.

1. Screen Replacement

• Power off the device and remove the SIM card tray.
• Carefully pry open the back cover using a plastic prying tool.
• Unscrew all visible screws holding the front screen assembly to the frame.
• Gently lift the screen assembly away from the frame and disconnect the ribbon cables.
• Connect the new screen's ribbon cables to the motherboard.
• Reattach the screen assembly to the frame and secure with screws.
• Snap the back cover back into place and insert the SIM card tray.
• Power on the device to test the new screen functionality.

2. Battery Replacement

• Power off the device and remove the SIM card tray.
• Pry open the back cover using a plastic prying tool.
• Locate the battery and carefully disconnect the battery connector from the motherboard.
• Remove the old battery using a prying tool.
• Place the new battery in the compartment and connect the battery connector to the motherboard.
• Reattach the back cover and insert the SIM card tray.
• Power on the device to ensure the new battery is functioning correctly.

3. Charging Port Replacement

• Power off the device and remove the SIM card tray.
• Pry open the back cover using a plastic prying tool.
• Unscrew and remove any screws securing the charging port module.
• Disconnect the charging port ribbon cable from the motherboard.
• Remove the faulty charging port and replace it with the new one.
• Reconnect the ribbon cable to the motherboard and secure the charging port module with screws.
• Close the back cover and insert the SIM card tray.
• Power on the device and verify charging functionality with a USB cable.

4. Rear Camera Assembly Replacement

• Power off the device and remove the SIM card tray.
• Pry open the back cover using a plastic prying tool.
• Locate the rear camera assembly and disconnect it from the motherboard.
• Remove the old rear camera assembly and replace it with the new one.
• Reconnect the rear camera assembly to the motherboard.
• Reattach the back cover and insert the SIM card tray.
• Power on the device and test the camera functions to ensure proper installation.

5. Front Camera Replacement

• Power off the device and remove the SIM card tray.
• Pry open the back cover using a plastic prying tool.
• Locate the front camera and disconnect it from the motherboard.
• Remove the old front camera and replace it with the new one.
• Reconnect the new front camera to the motherboard.
• Reattach the back cover and insert the SIM card tray.
• Power on the device and test the new front camera's functionality.