Oukitel C13 Pro spare parts

Oukitel C13 Pro Technical Characteristics

The Oukitel C13 Pro is a budget-friendly smartphone offering a range of features. Below are its main technical characteristics:

• Display: 6.18-inch HD+ IPS, 720 x 1520 pixels
• Processor: Quad-core MediaTek MT6739
• RAM: 2GB
• Storage: 16GB (expandable via microSD card up to 64GB)
• Operating System: Android 9.0 Pie
• Camera: Dual rear cameras (8MP + 2MP), 5MP front camera
• Battery: 3000mAh
• Connectivity: 4G LTE, Wi-Fi 802.11 b/g/n, Bluetooth 4.2, GPS
• Other Features: Fingerprint sensor, Face unlock

Instructions for Replacing Oukitel C13 Pro Components

Tools and Materials Needed

• Plastic opening tools
• Small Phillips screwdriver
• Tweezers
• Replacement parts
• Adhesive strips (if necessary)

Step-by-Step Replacement Guide

Step 1: Power Off the Device

Ensure the device is completely powered off before beginning any repair process. Hold the power button and select ""Power Off"" from the options.

Step 2: Remove the Back Cover

• Use a plastic opening tool to gently pry around the edges of the back cover.
• Lift the back cover off once it has been loosened.

Step 3: Disconnect the Battery

• Locate the battery connector and gently disconnect it using the plastic opening tool.

Step 4: Remove Components

• For replacing any internal components such as the motherboard, camera, or charging port, first remove any screws holding them in place using the small Phillips screwdriver.
• Gently lift the respective component using tweezers and replace it with the new part.
• Ensure all connectors are securely reattached.

Step 5: Reattach the Battery

• Reconnect the battery connector back into its place.

Step 6: Reinstall the Back Cover

• Carefully align and snap the back cover back onto the device.

Step 7: Test the Device

Power the device back on and test the new components to ensure everything is functioning correctly.