Oukitel C21 spare parts

Technical Characteristics of Oukitel C21 Repuestos

The Oukitel C21 is a budget-friendly smartphone that boasts a range of hardware components that can be replaced if needed. Here are its key technical characteristics:

Display

• Type: IPS LCD
• Size: 6.4 inches
• Resolution: 1080 x 2310 pixels

Processor

• Chipset: MediaTek Helio P60
• CPU: Octa-core (4x2.0 GHz Cortex-A73 & 4x2.0 GHz Cortex-A53)
• GPU: Mali-G72 MP3

Memory

• Internal: 64GB 4GB RAM
• Card slot: microSDXC

Camera

• Main Camera: Quad 16 MP + 2 MP + 2 MP + 2 MP
• Selfie Camera: 20 MP

Battery

• Type: Li-Ion 4000 mAh, non-removable

Instructions on How to Replace Oukitel C21 Repuestos

Tools Needed

• Small Phillips screwdriver
• Plastic opening tools
• Suction cup
• Tweezers
• Adhesive strips

General Precautions

• Ensure the phone is turned off before starting the repair.
• Keep track of all screws and small parts.
• Work in a clean, static-free environment.

Step-by-Step Instructions

1. Removing the Back Cover

The first step involves removing the back cover of the Oukitel C21:

• Use a suction cup to create a gap between the back cover and the phone chassis.
• Insert a plastic opening tool into the gap and gently pry around the edges to release the clips.

2. Disconnecting the Battery

Next, disconnect the battery to avoid any short circuits:

• Locate and remove the screws securing the battery connector shield using a Phillips screwdriver.
• Use tweezers to remove the shield.
• Disconnect the battery connector using a plastic tool.

3. Removing the Damaged Component

Depending on which component you need to replace, follow the appropriate steps:

For Screen Replacement:

• Disconnect the display connector from the motherboard.
• Use a heating tool to soften the adhesive around the edges of the screen.
• Carefully use the suction cup and plastic opening tools to remove the damaged screen.

For Battery Replacement:

• Remove any adhesive strips securing the battery.
• Gently lift and remove the old battery.

4. Installing the New Component

Replace the damaged component with the new one:

For Screen Replacement:

• Align the new screen and press it firmly into place.
• Reconnect the display connector to the motherboard.

For Battery Replacement:

• Place the new battery in the slot and secure it with adhesive strips.
• Reconnect the battery connector to the motherboard.

5. Reassembling the Phone

Finally, reassemble the phone:

• Replace the battery connector shield and secure it with screws.
• Align the back cover and press it firmly to snap it back into place.
• Power on the phone to ensure the new components are working correctly.