Oukitel C35 spare parts

Technical Characteristics of Oukitel C35 Repuestos

The Oukitel C35 is a versatile and robust smartphone with a range of components that can be replaced to extend its lifespan. Below are the key technical characteristics of the Oukitel C35 repuestos (spare parts):

1. Battery

• Capacity: 5150mAh
• Type: Li-Polymer
• Voltage: 3.8V

2. Screen

• Size: 6.517 inches
• Resolution: 1600 x 720 pixels
• Type: IPS LCD

3. Charging Port

• Type: USB Type-C
• Compatibility: Oukitel C35
• Additional Features: Fast Charging Support

4. Camera

• Rear Camera: 13MP + 2MP
• Front Camera: 5MP
• Features: Autofocus, Flash

5. Other Components

• Motherboard
• Speakers
• Buttons (Power, Volume)

Instructions on How to Replace Oukitel C35 Repuestos

Follow these detailed instructions to replace various components of the Oukitel C35:

1. Replacing the Battery

• Step 1: Power off your Oukitel C35 and remove the SIM card tray.
• Step 2: Use a thin plastic tool to carefully separate the back cover from the phone frame.
• Step 3: Disconnect the battery connector from the motherboard using a plastic spudger.
• Step 4: Carefully remove the adhesive strips holding the battery in place.
• Step 5: Insert the new battery, reconnect the battery connector, and press it firmly into position.
• Step 6: Reassemble the back cover and insert the SIM card tray.

2. Replacing the Screen

• Step 1: Power off the device and remove the SIM card tray.
• Step 2: Use a plastic separator tool to lift and remove the back cover.
• Step 3: Disconnect the battery to prevent any electrical damage.
• Step 4: Use a heat gun to soften the adhesive around the edges of the screen.
• Step 5: Carefully use a suction cup tool to lift the screen from the frame.
• Step 6: Disconnect the screen connector from the motherboard.
• Step 7: Connect the new screen to the motherboard and secure it in place with adhesive.
• Step 8: Reassemble the device by reversing the previous steps.

3. Replacing the Charging Port

• Step 1: Power off the phone and remove the SIM card tray.
• Step 2: Use a plastic opening tool to remove the back cover.
• Step 3: Disconnect the battery for safety.
• Step 4: Locate and disconnect the charging port flex cable from the motherboard.
• Step 5: Remove the screws securing the charging port assembly.
• Step 6: Replace the charging port with a new one and secure it with screws.
• Step 7: Reconnect the flex cable and reassemble the phone.

4. Replacing the Camera

• Step 1: Power off the device and remove the SIM card tray.
• Step 2: Separate the back cover using a plastic opening tool.
• Step 3: Disconnect the battery to prevent short circuits.
• Step 4: Locate the camera module and disconnect its flex cable.
• Step 5: Carefully remove the camera module from its housing.
• Step 6: Install the new camera module and reconnect the flex cable.
• Step 7: Reassemble the device by following the steps in reverse.

5. Replacing Other Components

For other components like the motherboard, speakers, or buttons, the general steps involve:

• Powering off the phone and removing the SIM card tray.
• Using a plastic tool to remove the back cover.
• Disconnecting the battery.
• Identifying and disconnecting the relevant flex cables.
• Removing screws or adhesive holding the component.
• Replacing the component and reassembling the phone.