Oukitel display lcd

Technical Characteristics

• Type: LCD
• Resolution: 1080 x 2160 pixels
• Screen Size: 5.99 inches
• Aspect Ratio: 18:9
• Pixel Density: 403 ppi
• Touchscreen Type: Capacitive Touchscreen
• Protection: Corning Gorilla Glass
• Brightness: 500 nits (typ)

Instructions for Replacing Pantalla LCD Oukitel

Required Tools

• Phillips #00 Screwdriver
• Plastic Pry Tools
• Spudger
• Tweezers
• Suction Cup
• Adhesive Strips

Step-by-Step Replacement Guide

Please follow the instructions carefully to replace the Pantalla LCD Oukitel:

1. Turn off your phone: Ensure that your Oukitel device is powered off to prevent any electrical damage during the replacement process.
2. Remove the back cover: Use a plastic pry tool to gently lift and remove the back cover of the phone. Be careful not to damage the clips.
3. Remove the battery: Locate the battery and use the spudger tool to pry it out.
4. Disconnect the cables: Using tweezers, gently disconnect the ribbon cables connected to the motherboard. These cables connect the LCD screen to the system.
5. Unscrew the screws: Remove all screws securing the motherboard and the LCD screen frame using the Phillips #00 Screwdriver.
6. Remove the damaged LCD: Gently lift the motherboard and use a suction cup to pull the LCD screen away from the frame.
7. Install the new LCD: Align the new LCD with the phone frame and press it gently to secure it in place.
8. Reconnect the cables: Reconnect the ribbon cables that you previously disconnected, ensuring they are securely attached.
9. Reassemble your phone: Place the motherboard back, screw in the securing screws, insert the battery, and reattach the back cover. Ensure everything is tightly fitted.
10. Power on the device: Turn on your Oukitel device to ensure that the new LCD is functioning correctly.