Oukitel K10000 spare parts

Technical Characteristics of Oukitel K10000 Repuestos

The Oukitel K10000 is best known for its extraordinary battery life and rugged design. Whether you are looking to replace your battery, screen, or other components, knowing the technical specifications is crucial for proper fitting and performance. Below are the key technical characteristics of Oukitel K10000 repuestos (replacement parts):

Battery

• Type: Li-Polymer
• Capacity: 10,000 mAh
• Voltage: 3.8V

Screen

• Type: IPS LCD capacitive touchscreen
• Size: 5.5 inches
• Resolution: 720 x 1280 pixels
• Glass: Corning Gorilla Glass 3

Other Components

• Processor: MediaTek MT6735P
• RAM: 2GB
• Internal Storage: 16GB
• Camera: 13 MP rear, 5 MP front

Instructions for Replacing Oukitel K10000 Repuestos

Follow these detailed instructions to safely and effectively replace various parts of your Oukitel K10000.

Battery Replacement

• Step 1: Power off your Oukitel K10000 and remove any SIM or memory cards.
• Step 2: Use a plastic pry tool to carefully remove the back cover of the phone.
• Step 3: Disconnect the battery connector gently using a spudger.
• Step 4: Remove the screws holding the battery frame and lift the battery out.
• Step 5: Insert the new battery, secure it with the screws, and reconnect the battery connector.
• Step 6: Replace the back cover and power on your phone to ensure the new battery is working correctly.

Screen Replacement

• Step 1: Begin by powering off your phone and removing the back cover, battery, SIM, and memory cards.
• Step 2: Unscrew all the screws holding the internal frame in place.
• Step 3: Use a plastic tool to lift the internal frame and disconnect the screen ribbon cable.
• Step 4: Apply heat around the edges of the screen using a heat gun or a hair dryer to soften the adhesive.
• Step 5: Carefully use a pry tool to lift the old screen and remove it from the frame.
• Step 6: Align the new screen in the frame and press it firmly to set the adhesive.
• Step 7: Reconnect the screen ribbon cable, reattach the internal frame, and secure it with screws.
• Step 8: Reinstall the battery, SIM card, memory card, and back cover. Power on the device to test the new screen.

Camera Replacement

• Step 1: Power off the phone and remove the back cover, battery, SIM card, and memory card.
• Step 2: Unscrew and remove the internal frame to access the camera components.
• Step 3: Disconnect the ribbon cable connected to the camera module you wish to replace (front or rear).
• Step 4: Gently pry out the old camera module and replace it with the new one, ensuring the ribbon cable is properly connected.
• Step 5: Reassemble the internal frame, reinstall the screws, and replace the battery, SIM card, memory card, and back cover. Power on the phone and test the new camera module to ensure it is functioning correctly.

By following these steps carefully, you can successfully replace parts of your Oukitel K10000. Always make sure to use genuine or high-quality repuestos to maintain the performance and reliability of your device.