Oukitel K3 spare parts

Technical Characteristics of Oppo A9 2020 A11X Repuestos

The Oppo A9 2020 A11X is a popular mid-range smartphone known for its excellent design and performance. Here are the main technical characteristics of its replacement parts (repuestos):

Display

• Type: IPS LCD
• Size: 6.5 inches
• Resolution: 720 x 1600 pixels
• Protection: Corning Gorilla Glass 3+

Battery

• Type: Li-Po 5000 mAh, non-removable
• Charging: 10W

Camera

• Main Camera: Quad 48 MP, f/1.8, (wide), 8 MP, f/2.3 (ultrawide), 2 MP, f/2.4 (monochrome), 2 MP, f/2.4 (depth sensor)
• Front Camera: Single 16 MP, f/2.0

Instructions for Replacing Oppo A9 2020 A11X Repuestos

Tools Required:

• Phillips screwdriver
• Plastic opening tools
• SIM card ejector tool
• Tweezers
• Suction cup
• Ziploc bags and marker (for screw management)

Steps to Replace the Display

• 1. Power off the phone and remove the SIM card tray using the SIM card ejector tool.
• 2. Use the Phillips screwdriver to remove the screws on the lower part of the phone near the charging port.
• 3. Gently insert the suction cup near the bottom edge of the display and pull up to create a small gap.
• 4. Insert a plastic opening tool into the gap and carefully work it around the edges to detach the back cover from the phone frame. Be careful not to damage the internal components.
• 5. Disconnect the battery connector to avoid any electrical shock.
• 6. Remove the screws and disconnect any cables securing the old display to the phone's motherboard.
• 7. Carefully remove the old display. If it is glued, use a bit of heat (hairdryer or heat gun) to soften the adhesive.
• 8. Position the new display and connect the necessary cables to the motherboard.
• 9. Reattach any screws that were removed previously.
• 10. Reconnect the battery connector.
• 11. Align the back cover and press it gently until it snaps back into place.
• 12. Replace the screws on the bottom part of the phone.
• 13. Insert the SIM card tray back into the slot.
• 14. Power on the phone to check if the new display is working correctly.

Steps to Replace the Battery

• 1. Follow steps 1-5 of the display replacement instructions to open the phone and disconnect the battery connector.
• 2. Locate the battery and gently lift it using a plastic opening tool. If the battery is glued, use a bit of heat (hairdryer or heat gun) to soften the adhesive.
• 3. Once the battery is freed, remove it from the phone.
• 4. Place the new battery in the same spot, ensuring it is well aligned.
• 5. Connect the battery connector to the motherboard.
• 6. Follow steps 10-14 of the display replacement instructions to reassemble the phone.