Oukitel K7 Power spare parts

Oukitel K7 Power Technical Characteristics

The Oukitel K7 Power is a robust smartphone known for its exceptional battery life and durability. Here are the key technical characteristics:

Specifications

• Screen: 6.0-inch IPS LCD, 720 x 1440 pixels
• Processor: MediaTek MT6737T, Quad-core 1.5 GHz
• RAM: 2 GB
• Storage: 16 GB (expandable via microSD up to 64 GB)
• Battery: 10,000 mAh Li-Po
• Operating System: Android 8.1 Oreo
• Camera: Rear: 13 MP, Front: 5 MP

Repuestos

• Screen Replacement
• Battery Replacement
• Charging Port Replacement
• Camera Replacement
• Back Cover Replacement

Instructions for Replacing Oukitel K7 Power Repuestos

1. Screen Replacement

Follow these steps to replace the screen of your Oukitel K7 Power:

• Turn off the phone and remove the SIM card tray.
• Use a screwdriver to remove the screws securing the back cover.
• Carefully use a plastic opening tool to detach the back cover from the phone's body.
• Disconnect the battery connector to avoid any short circuits.
• Remove the screws securing the screen and carefully detach it from the motherboard.
• Attach the new screen and secure it with screws.
• Reconnect the battery connector, reattach the back cover, and secure it with screws.
• Turn on the phone to ensure the screen works correctly.

2. Battery Replacement

To replace the battery in your Oukitel K7 Power, follow these steps:

• Turn off the phone and remove the SIM card tray.
• Use a screwdriver to remove the screws securing the back cover.
• Carefully use a plastic opening tool to detach the back cover from the phone's body.
• Disconnect the battery connector to isolate the battery from the motherboard.
• Remove the adhesive tapes or screws holding the battery in place.
• Carefully pry out the old battery and replace it with the new one.
• Reconnect the battery connector.
• Reattach the back cover and secure it with screws.

3. Charging Port Replacement

To replace the charging port on your Oukitel K7 Power, proceed as follows:

• Turn off the phone and remove the SIM card tray.
• Use a screwdriver to remove the screws securing the back cover.
• Carefully use a plastic opening tool to detach the back cover from the phone's body.
• Locate the charging port assembly and disconnect it from the motherboard.
• Remove any screws or adhesive holding the charging port in place.
• Replace the damaged charging port with a new one.
• Secure the new charging port with screws or adhesive.
• Reconnect the charging port to the motherboard.
• Reattach the back cover and secure it with screws.

4. Camera Replacement

To replace the camera module, follow these steps:

• Turn off the phone and remove the SIM card tray.
• Use a screwdriver to remove the screws securing the back cover.
• Carefully use a plastic opening tool to detach the back cover from the phone's body.
• Locate the camera module and disconnect it from the motherboard.
• Remove the screws securing the camera module.
• Carefully replace the old camera module with a new one.
• Reconnect the new camera module to the motherboard.
• Reattach the back cover and secure it with screws.

5. Back Cover Replacement

If you need to replace the back cover, follow these simple steps:

• Turn off the phone and remove the SIM card tray.
• Use a screwdriver to remove the screws securing the back cover.
• Carefully use a plastic opening tool to detach the back cover from the phone's body.
• Detach any components fixed to the old back cover and transfer them to the new cover.
• Attach the new back cover and secure it with screws.