Oukitel K7 spare parts

Oukitel K7 Replacement Parts Technical Characteristics

Battery

Capacity: 10000 mAh

Type: Li-Po non-removable

Standby Time: Up to 30 days

Talk Time: Up to 72 hours

Screen

Type: IPS LCD capacitive touchscreen

Size: 6.0 inches

Resolution: 1080 x 2160 pixels, 18:9 ratio (~402 ppi density)

Protection: Corning Gorilla Glass

Camera

Main Camera: Dual - 13 MP, AF + 2 MP, depth sensor

Features: LED flash, HDR, panorama

Video: 1080p@30fps

Selfie Camera: 5 MP

Instructions for Replacing Oukitel K7 Parts

Tools Needed

• Plastic Pry Tool
• Phillips Screwdriver
• Tweezers
• SIM Card Ejector Tool

How to Replace the Battery

• Turn off the phone.
• Remove the SIM card tray using the SIM card ejector tool.
• Use the plastic pry tool to gently remove the back cover starting from the notch on the side of the phone.
• Carefully disconnect the battery connector using tweezers.
• Remove the old battery. Be careful to avoid puncturing the battery or damaging other components.
• Insert the new battery in place.
• Reconnect the battery connector.
• Place the back cover back onto the phone and press gently around the edges to secure it.
• Reinsert the SIM card tray.
• Turn on the phone and verify the new battery is functioning correctly.

How to Replace the Screen

• Turn off the phone and remove the SIM card tray using the SIM card ejector tool.
• Use the plastic pry tool to gently remove the back cover.
• Disconnect the battery connector using tweezers.
• Carefully remove the screws securing the mid-frame using a Phillips screwdriver.
• Gently detach the mid-frame from the phone body.
• Disconnect the screen connector from the motherboard using tweezers.
• Heat the edges of the screen slightly with a heat gun or hairdryer to soften the adhesive.
• Use the plastic pry tool to gently lift and remove the damaged screen from the phone body.
• Carefully apply adhesive to the edges of the new screen.
• Connect the new screen to the motherboard.
• Place the new screen onto the phone body and press gently to ensure it adheres properly.
• Reconnect the battery connector.
• Reattach the mid-frame and secure it with the screws.
• Place the back cover onto the phone and press around the edges to secure it.
• Reinsert the SIM card tray.
• Turn on the phone and verify the new screen is functioning correctly.