Oukitel U8 spare parts

Oukitel U8 Technical Characteristics

The Oukitel U8 is known for its robust build and budget-friendly offerings. Below are the key technical characteristics of the device:

• Display: 5.5-inch HD, 720 x 1280 pixels
• Processor: MediaTek MT6735, Quad-core 1.0 GHz Cortex-A53
• RAM: 2GB
• Internal Storage: 16GB (expandable via microSD up to 32GB)
• Rear Camera: 13 MP
• Front Camera: 5 MP
• Battery: 2850 mAh
• Operating System: Android 5.1 (Lollipop)
• SIM: Dual SIM (Micro-SIM/Nano-SIM)
• Other Features: Fingerprint sensor, Bluetooth 4.0, GPS

Instructions for Replacing Oukitel U8 Repuestos

Tools Needed:

• Plastic prying tools
• Small Phillips screwdriver
• SIM card ejector tool
• Anti-static wrist strap (optional)

Step-by-Step Instructions:

Step 1: Power Off the Device

Ensure your Oukitel U8 is completely powered off before starting the repair process. This prevents any electrical issues from arising during the procedure.

Step 2: Remove the SIM Card Tray

Use the SIM card ejector tool to remove the SIM card tray from the side of the device. Set the tray aside carefully.

Step 3: Open the Back Cover

Using a plastic prying tool, carefully insert it into the seam between the back cover and the phone body. Slowly slide the tool around the edges to detach the clips that hold the back cover in place. Gently lift the back cover off the device.

Step 4: Disconnect the Battery

Locate the battery connector on the motherboard. Using a plastic prying tool, carefully disconnect the battery from the motherboard. This will ensure that no power is running through the phone's circuits while you work.

Step 5: Remove the Screws

Use a small Phillips screwdriver to remove all the screws that secure the components you wish to replace. Keep track of the screws, as you will need them when reassembling the device.

Step 6: Replace the Desired Components

Carefully remove the faulty component (e.g., battery, camera, screen) by gently prying it away from the housing. Replace it with the new component by positioning it correctly and securing it with screws if necessary.

Step 7: Reassemble the Device

Reattach all screws you have previously removed. Reconnect the battery to the motherboard. Align the back cover with the phone body and press down gently until all clips snap back into place.

Step 8: Power On the Device

Insert the SIM card tray back into the device. Power on your Oukitel U8 to ensure everything is working correctly. If your device powers on and operates as expected, the replacement process was successful.

Congratulations! You have successfully replaced the specified component in your Oukitel U8. If you encounter any issues, double-check all connections and screws to make sure they are properly secured.