Oukitel WP13 spare parts

Technical Characteristics of Oukitel WP13 Repuestos

Screen

Size: 6.52 inches

Resolution: 720 x 1600 pixels

Type: IPS LCD

Battery

Capacity: 5280 mAh

Type: Li-Po, non-removable

Camera

Rear: 48 MP, f/1.8 (wide), PDAF

Secondary: 8 MP, f/2.2 (ultrawide) + 0.3 MP, f/2.4 (depth)

Front: 8 MP, f/2.0 (wide)

Processor

Model: MediaTek MT6771 Helio P60

CPU: Octa-core (4x2.0 GHz Cortex-A73 & 4x2.0 GHz Cortex-A53)

GPU: Mali-G72 MP3

Memory

RAM: 4 GB

Internal Storage: 128 GB

Expandable: microSDXC (dedicated slot)

Connectivity

Network: 5G, 4G LTE, 3G, 2G

Wi-Fi: 802.11 a/b/g/n/ac, dual-band

Bluetooth: 4.2, A2DP

USB: Type-C 2.0

Additional Features

Operating System: Android 11

Ruggedness: IP68/IP69K, MIL-STD-810G compliant

Sensors: Fingerprint (side-mounted), accelerometer, proximity, compass

Instructions for Replacing Oukitel WP13 Repuestos

Tools Needed

• Plastic Pry Tools
• Suction Cup
• Phillips #00 Screwdriver
• Tweezers
• Adhesive Strips
• Spudger
• Replacement Parts (screen, battery, etc.)

General Instructions

Step 1: Power Off the Device

Ensure the device is completely powered off before beginning any repair to avoid electric shock or damage.

Step 2: Remove the Back Cover

• Use a suction cup to gently lift the back cover.
• Slide a plastic pry tool around the edges to detach the adhesive securing the back cover.
• Carefully remove the back cover and set it aside.

Step 3: Disconnect the Battery

• Locate the battery connector and disconnect it using a spudger.
• This step is crucial to prevent any short-circuiting during the repair process.

Step 4: Removing Defective Parts (e.g., Screen, Battery)

• If replacing the screen:
  • Remove the screws securing the screen using the Phillips #00 screwdriver.
  • Lift the screen gently using plastic pry tools from the edges.
  • Disconnect the display connector and remove the screen.
• If replacing the battery:
  • Use a spudger to gently pry the battery out of its compartment.
  • Be cautious not to bend or puncture the battery.

Step 5: Install the New Parts

• If installing a new screen:
  • Connect the new screen to the display connector.
  • Secure the screen with screws.
• If installing a new battery:
  • Place the new battery into the compartment.
  • Reconnect the battery connector carefully.
  • Ensure the new battery is properly seated.

Step 6: Reassemble the Device

Position the back cover back onto the device and press gently around the edges to secure the adhesive. Double-check all connections before completing this step.

Step 7: Power On the Device

Power on the device to ensure the new parts are functioning correctly. If everything is operating as expected, your repair is complete.

Note: If any issues arise during the replacement process, it is recommended to consult a professional technician to avoid further damage to the device.