Oukitel WP16 spare parts

Technical Characteristics of Oukitel WP16 Repuestos

The Oukitel WP16 is a rugged smartphone known for its durability and robust performance. Below are the technical characteristics of the key repuestos (replacement parts) involved:

Battery

• Capacity: 10600mAh
• Type: Li-Po
• Voltage: 4.4V

Screen

• Type: IPS LCD
• Size: 6.39 inches
• Resolution: 720 x 1560 pixels
• Protection: Corning Gorilla Glass

Camera Module

• Rear Camera: 12MP + 2MP + 2MP
• Front Camera: 20MP

USB Charging Port

• Type: USB Type-C
• Compatibility: Fast Charging

Instructions on How to Replace Oukitel WP16 Repuestos

Battery Replacement

Follow these steps to replace the Oukitel WP16 battery:

• Step 1: Power off the device and remove any SIM card and SD card.
• Step 2: Use a screwdriver to remove the screws securing the back cover.
• Step 3: Carefully pry open the back cover using a plastic opening tool.
• Step 4: Disconnect the battery connector from the motherboard.
• Step 5: Remove the old battery and replace it with a new Oukitel WP16 battery.
• Step 6: Reconnect the battery connector and reassemble the back cover by securing screws.

Screen Replacement

To replace the screen on the Oukitel WP16, follow these instructions:

• Step 1: Power off the smartphone and remove the SIM and SD cards.
• Step 2: Remove screws from the back cover using a small Phillips screwdriver.
• Step 3: Gently detach the back cover and locate the screen connectors on the motherboard.
• Step 4: Disconnect the screen connectors carefully.
• Step 5: Use a heat gun to soften the adhesive around the screen.
• Step 6: Gently separate the screen from the frame using a plastic tool.
• Step 7: Install the new screen, reconnect the connectors, and secure the back cover with screws.

Camera Module Replacement

To replace the camera module, use the following steps:

• Step 1: Power off your device and remove any external cards.
• Step 2: Remove the back cover by unscrewing the screws.
• Step 3: Locate the rear camera module and disconnect its connector from the motherboard.
• Step 4: Carefully remove the camera module and replace it with the new one.
• Step 5: Reconnect the camera connector and reassemble the back cover.

USB Charging Port Replacement

Follow these steps to replace the USB charging port:

• Step 1: Turn off the phone and remove the SIM and SD cards.
• Step 2: Unscrew the screws on the back cover and open it.
• Step 3: Locate the USB port and its connection to the motherboard.
• Step 4: Use a soldering iron to detach the old USB charging port.
• Step 5: Solder the new USB port into place and ensure all connections are secure.
• Step 6: Reassemble the phone by securing the back cover.