Oukitel WP17 spare parts

Technical Characteristics of Oukitel WP17 Repuestos

Oukitel WP17 repuestos (replacement parts) are designed to maintain or restore the functionality of the Oukitel WP17 smartphone. Below are some of the key technical characteristics:

• Battery: Li-Po 8300 mAh, non-removable
• Display: 6.78 inches, IPS LCD, 1080 x 2400 pixels
• Processor: MediaTek Helio G95
• Rear Camera: Triple 64 MP + 2 MP + 2 MP
• Front Camera: 16 MP
• Operating System: Android 11
• Memory: 8GB RAM, 128GB storage
• Water and Dust Resistance: IP68/IP69K
• Others: Fingerprint sensor, Accelerometer, Gyro, Proximity, Compass

Instructions on How to Replace Oukitel WP17 Repuestos

Replacing the Battery

Note: The battery is non-removable for general users. Professional assistance may be required.

• 1. Turn off the device completely.
• 2. Use a SIM ejector tool to remove the SIM card tray from the device.
• 3. Use a heat gun or hairdryer to soften the adhesive under the back cover.
• 4. Carefully pry open the back cover using a plastic opening tool.
• 5. Disconnect the battery connector from the motherboard.
• 6. Remove any screws securing the battery in place.
• 7. Use a plastic pry tool to carefully lift the battery out of the device.
• 8. Insert the new battery, secure it with screws, and reconnect the battery connector.
• 9. Place the back cover back onto the device and press firmly. Reinsert the SIM card tray.
• 10. Power on the device to ensure the new battery is functioning properly.

Replacing the Display

• 1. Power off the Oukitel WP17 device.
• 2. Use a SIM ejector tool to remove the SIM card tray from the device.
• 3. Apply heat around the edges of the display using a heat gun or hairdryer to soften the adhesive.
• 4. Carefully pry open the display using a plastic opening tool, starting from the edges.
• 5. Disconnect the display connector from the motherboard.
• 6. Remove any screws securing the old display, then carefully extract the damaged display.
• 7. Align the new display and secure it with any necessary screws.
• 8. Reconnect the display connector to the motherboard.
• 9. Press the new display firmly onto the adhesive, ensuring it is secured well.
• 10. Reinsert the SIM card tray and power on the device to verify successful replacement.

Replacing the Rear Camera

• 1. Power off the Oukitel WP17 device.
• 2. Remove the SIM card tray using a SIM ejector tool.
• 3. Apply heat around the edges of the back cover to soften the adhesive, then use a plastic opening tool to pry it open.
• 4. Disconnect the battery connector and then disconnect the rear camera connector from the motherboard.
• 5. Remove any screws securing the rear camera module and carefully extract the old camera.
• 6. Place the new rear camera module in position and secure it with the necessary screws.
• 7. Reconnect the camera connector to the motherboard, then reconnect the battery connector.
• 8. Press the back cover firmly to secure it back in place. Ensure there is good adhesion.
• 9. Reinsert the SIM card tray and power on the device to confirm the camera is functioning.