Oukitel WP21 Ultra spare parts

Oukitel WP21 Ultra Technical Characteristics

Technical Specifications

• Display: 6.78-inch 1080 x 2340 pixels, IPS LCD
• Processor: MediaTek Dimensity 900
• RAM: 8GB
• Storage: 256GB, expandable via microSD
• Rear Cameras: 64MP (main) + 12MP (wide-angle) + 20MP (night vision)
• Front Camera: 16MP
• Battery: 9800mAh
• Operating System: Android 12
• Connectivity: 5G, Wi-Fi, Bluetooth 5.1, NFC
• Rugged Features: IP68/IP69K, MIL-STD-810G compliant, dustproof, shockproof, waterproof

Common Oukitel WP21 Ultra Repuestos

• Display Assembly
• Battery
• Back Cover
• Camera Modules
• Charge Port
• Speakers

Instructions for Replacing Oukitel WP21 Ultra Repuestos

General Precautions

Before starting any repair, ensure to power off your device and remove the SIM and SD cards. Work on a clean, dry surface free of static electricity.

Replacing the Display Assembly

• Step 1: Use the appropriate screwdriver to remove the screws from the back cover of the device.
• Step 2: Use a plastic prying tool to gently lift the back cover and remove it.
• Step 3: Disconnect the battery connector to prevent any power running through the device while you work.
• Step 4: Disconnect the display connector from the motherboard.
• Step 5: Gently heat the edges of the display using a heat gun or a hairdryer to soften the adhesive.
• Step 6: Use a suction cup and a prying tool to carefully lift and remove the old display assembly.
• Step 7: Remove any remaining adhesive on the frame and clean the surface.
• Step 8: Apply new adhesive to the frame and carefully place the new display assembly in position.
• Step 9: Reconnect the display connector to the motherboard.
• Step 10: Reconnect the battery connector and replace the back cover.
• Step 11: Secure the back cover with the screws and power on the device to test the new display.

Replacing the Battery

• Step 1: Remove the back cover by following the steps outlined for display replacement.
• Step 2: Disconnect the battery connector from the motherboard.
• Step 3: Gently heat the edges of the battery using a heat gun or a hairdryer to soften the adhesive.
• Step 4: Use a prying tool to carefully lift and remove the old battery.
• Step 5: Remove any remaining adhesive and clean the battery compartment.
• Step 6: Apply new adhesive strips to the new battery and place it in the compartment.
• Step 7: Reconnect the battery connector to the motherboard.
• Step 8: Replace the back cover and secure it with the screws.
• Step 9: Power on the device to ensure the new battery is working correctly.

Replacing the Camera Modules

• Step 1: Follow the initial steps to remove the back cover and disconnect the battery.
• Step 2: Locate the camera module connectors on the motherboard.
• Step 3: Use a small prying tool to disconnect the camera module connectors.
• Step 4: Carefully remove the old camera modules from their slots.
• Step 5: Place the new camera modules in the slots and reconnect their connectors to the motherboard.
• Step 6: Reconnect the battery connector, replace the back cover, and secure it with the screws.
• Step 7: Power on the device to test the new camera modules for proper functionality.

Note: For other parts like the charge port and speakers, similar steps involving the disconnection and careful removal of components apply. Always ensure to work methodically to avoid damaging any internal circuits.