Oukitel WP27 spare parts

Technical Characteristics of Oukitel WP27 Repuestos

Display

Type: IPS LCD
Size: 6.52 inches
Resolution: 720 x 1600 pixels

Platform

OS: Android 11
Chipset: MediaTek Helio P22
CPU: Octa-core (4x2.0 GHz Cortex-A53 & 4x1.5 GHz Cortex-A53)
GPU: PowerVR GE8320

Memory

Internal: 64GB 4GB RAM
Card slot: microSDXC

Camera

Main Camera: 48 MP, f/1.8, PDAF
Selfie Camera: 16 MP

Battery

Type: Li-Po 5000 mAh, non-removable

Instructions to Replace Oukitel WP27 Repuestos

Preparation

• Ensure the device is powered off.
• Prepare a clean and organized workspace.
• Gather necessary tools: screwdriver set, plastic prying tools, tweezers.
• If available, consult the device's repair manual for detailed diagrams.

Steps to Replace the Display

• Unscrew the back cover screws using the appropriate screwdriver.
• Use a plastic prying tool to gently open the back cover.
• Disconnect the battery connector carefully to avoid any short circuits.
• Disconnect the display cable connected to the motherboard.
• Remove the damaged display.
• Install the new display by connecting the display cable back to the motherboard.
• Reconnect the battery connector.
• Close the back cover and secure it with screws.
• Power on the device to check if the new display is working correctly.

Steps to Replace the Battery

• Open the back cover as described in the previous section.
• Disconnect the battery connector from the motherboard.
• Remove any adhesive securing the battery using a plastic prying tool.
• Carefully lift the battery out of the compartment.
• Place the new battery into the compartment and secure it with adhesive if necessary.
• Reconnect the battery connector to the motherboard.
• Close the back cover and screw it back into place.
• Power on the device to ensure it is functioning with the new battery.

Tips and Warnings

• Avoid using metal tools directly on electronic components to prevent short circuits.
• If the device does not power on after replacement, double-check all connections.
• Perform all repairs in a static-free environment to avoid damaging sensitive components.