Oukitel WP5000 spare parts

Oukitel WP5000 Technical Characteristics

The Oukitel WP5000 is a robust smartphone that offers rugged features combined with modern technology. Below are the key technical characteristics of the Oukitel WP5000:

• Display: 5.7-inch HD+ (720 x 1440 pixels) IPS LCD
• Processor: MediaTek Helio P25 Octa-core 2.5 GHz
• RAM: 6GB
• Storage: 64GB, expandable via microSD up to 128GB
• Camera: Rear Dual Camera 21MP + 5MP, Front Camera 8MP
• Battery: 5200mAh, non-removable
• Operating System: Android 7.1 Nougat
• Waterproof Rating: IP68

Instructions on How to Replace Oukitel WP5000 Parts

Replacing components on the Oukitel WP5000 requires patience and a set of specialized tools. Below are detailed instructions for replacing various parts of the Oukitel WP5000.

Tools Required:

• Phillips Screwdriver
• Plastic Pry Tools
• Tweezers
• Suction Cup

Step-by-Step Instructions:

1. Back Cover Removal:

• Turn off the Oukitel WP5000 and remove the SIM card tray.
• Use a Phillips screwdriver to remove all screws holding the back cover in place.
• Insert a plastic pry tool between the back cover and the phone chassis. Gently work your way around the edges to release the clips until the back cover is detached.

2. Battery Replacement:

• Once the back cover is removed, locate the battery connector.
• Use a plastic pry tool to disconnect the battery connector from the motherboard.
• Remove the adhesive strips securing the battery to the phone chassis.
• Gently lift the battery out of its compartment.
• To install a new battery, place it in the compartment and connect the battery connector to the motherboard.
• Replace the adhesive strips to secure the new battery in place.

3. Screen Replacement:

• Remove the screws holding the display assembly in place using a Phillips screwdriver.
• Use a suction cup to gently lift the screen from the front side of the device.
• Insert a plastic pry tool between the screen and the phone chassis, working your way around the edges to release the adhesive.
• Once the screen is detached, disconnect the flex cables connecting the screen to the motherboard.
• To install the new screen, align the flex cables with their respective connectors on the motherboard and gently press them into place.
• Fit the new screen into the phone chassis and press firmly around the edges to ensure the adhesive sticks.
• Reinsert the screws to secure the new display assembly.

4. Camera Replacement:

• Locate the camera module once the back cover is removed.
• Use tweezers to disconnect the camera flex cable from the motherboard.
• Remove the screws securing the camera module in place using a Phillips screwdriver.
• Gently lift the camera module out of its compartment.
• To install a new camera, place it in the compartment and secure it with screws.
• Reconnect the camera flex cable to the motherboard using tweezers.

After replacing any component, reassemble the device by reversing the steps. Carefully ensure that all connectors are secure and that the back cover is properly clipped into place before reinserting the screws.