Display lcd

Technical Characteristics of Pantalla LCD OWN

The Pantalla LCD OWN is a liquid crystal display designed for smartphones and electronic devices. Below are its key technical specifications:

• Screen Size: 5.5 inches
• Resolution: 1080 x 1920 pixels
• Pixel Density: 401 PPI
• Display Technology: IPS LCD
• Touchscreen Type: Capacitive, Multi-touch
• Color Depth: 16M colors
• Glass Protection: Corning Gorilla Glass
• Brightness: 450 nits (typical)
• Contrast Ratio: 1000:1

Instructions for Replacing Pantalla LCD OWN

Required Tools and Equipment

• Small Phillips head screwdriver
• Plastic pry tools
• Suction cup
• Small tweezers
• Adhesive strips or tape
• Anti-static wrist strap (optional)

Step-by-Step Instructions

Follow these detailed steps to safely replace the Pantalla LCD OWN:

• Power off the Device: Before starting, ensure the device is completely powered off to avoid any electrical damage.
• Remove the Back Cover: Using the plastic pry tool, gently remove the back cover of the device.
• Remove the Battery: Carefully disconnect the battery connector and remove the battery from the device.
• Unscrew the Screws: Locate and remove all screws securing the mid-frame or shielding plates using the Phillips head screwdriver.
• Detach the Mid-Frame: Using the plastic pry tool, carefully detach the mid-frame or main housing of the device to expose the internal components.
• Disconnect the LCD Connector: Locate the LCD connector cable and use the tweezers to carefully disconnect it.
• Remove the Damaged LCD: Place the suction cup on the front screen and gently lift to separate the damaged LCD from the device. Use the plastic pry tool where necessary to assist in lifting.
• Prepare the New LCD: Remove any protective films from the new Pantalla LCD OWN.
• Connect the New LCD: Carefully connect the new LCD to the LCD connector cable.
• Secure the LCD: Gently place the new LCD into position. Make sure it is aligned properly and use adhesive strips or tape to secure it.
• Reassemble the Device: Reattach the mid-frame or housing, screw back the screws, reconnect the battery and finally put back the back cover.
• Power On and Test: Power on the device and check the new LCD display to ensure it is functioning correctly without any dead pixels or touch issues.

By following these instructions carefully, you can successfully replace the Pantalla LCD OWN on your device. Ensure to work in a clean, static-free environment to avoid any damage to the internal components.