Own S3030 spare parts

Technical Characteristics of Own S3030 Repuestos

The Own S3030 is a smartphone which features a range of replaceable parts. The main technical characteristics of the Own S3030 repuestos include:

• Display: 5.0-inch IPS LCD, 720 x 1280 pixels resolution
• Processor: Quad-core 1.3 GHz Cortex-A7
• Memory: 1GB RAM
• Storage: 8GB internal storage, microSD up to 32GB
• Camera: 8 MP rear camera, 2 MP front camera
• Battery: Removable Li-Po 2000 mAh battery
• OS: Android 7.0 (Nougat)
• Additional Features: Dual SIM, accelerometer, proximity sensor, and more

Instructions for Replacing Own S3030 Repuestos

1. Replacing the Display

Follow these detailed steps to replace the display of the Own S3030:

• Power off the device and remove the back cover.
• Remove the battery and any SIM or microSD cards.
• Use a Phillips screwdriver to remove all screws securing the midframe.
• Carefully pry open the midframe using a plastic opening tool.
• Disconnect the ribbon cables connected to the display from the motherboard.
• Gently heat around the edges of the display using a heat gun to soften the adhesive.
• Use a plastic tool to detach the display from the frame.
• Place the new display into the frame and press it firmly to secure it.
• Reconnect the ribbon cables to the motherboard.
• Reassemble the midframe and tighten all screws.
• Replace the battery, SIM, and microSD cards, and finally, replace the back cover.
• Power on the device to ensure the new display functions properly.

2. Replacing the Battery

To replace the battery of the Own S3030, follow these steps:

• Power off the device and remove the back cover.
• Gently lift the battery using your fingernail or a plastic tool from the designated notch.
• Take the new battery and align it with the connectors and slots.
• Press the battery into place firmly.
• Replace the back cover.
• Power on the device to ensure the new battery is working.

3. Replacing the Camera

If you need to replace the camera module on the Own S3030, proceed as follows:

• Power off the device and remove the back cover and battery.
• Remove any SIM or microSD cards.
• Use a Phillips screwdriver to unscrew and detach the midframe.
• Disconnect the camera module flex cable from the motherboard.
• Remove the old camera module from its socket.
• Place the new camera module into the socket.
• Reconnect the camera flex cable to the motherboard.
• Reassemble the midframe and secure it with screws.
• Insert the battery, SIM, and microSD cards back into place.
• Replace the back cover.
• Power on the device and test the new camera module.