Own S4025 spare parts

Technical Characteristics of Own S4025 Repuestos

Battery

Type: Lithium-Ion
Capacity: 1500mAh
Voltage: 3.7V

Screen

Type: TFT LCD
Size: 4.0 inches
Resolution: 480 x 800 pixels

Camera

Rear Camera: 5 MP
Front Camera: 0.3 MP

Processor

Type: Dual-core
Speed: 1.2 GHz

Memory

RAM: 512 MB
Internal Storage: 4 GB
Expandable: Up to 32 GB via microSD

Operating System

OS: Android 4.4 KitKat

Instructions for Replacing Own S4025 Repuestos

Replacing the Battery

• Turn off the phone and disconnect any charging cables.
• Remove the back cover by gently prying it from the bottom edge.
• Locate the battery compartment and remove the old battery by gently lifting it out.
• Insert the new battery ensuring the contacts are properly aligned.
• Replace the back cover and press firmly to secure it in place.
• Turn the phone on to verify the replacement is successful.

Replacing the Screen

• Turn off the phone and remove the battery as described in the battery replacement section.
• Use a small Phillips screwdriver to remove the screws securing the back frame.
• Carefully pry open the back frame to access the interior components.
• Disconnect the ribbon cables attached to the old screen.
• Gently remove the old screen from the front frame, taking care not to damage any components.
• Connect the ribbon cables to the new screen.
• Place the new screen into the front frame, ensuring it sits correctly.
• Reassemble the back frame and secure it with the screws.
• Reinsert the battery and back cover.
• Turn on the phone to ensure the new screen is functioning properly.

Replacing the Camera

• Turn off the phone and remove the battery as described in the battery replacement section.
• Remove the screws securing the back frame and carefully pry it open.
• Locate the camera module on the motherboard.
• Disconnect the camera module ribbon cable.
• Gently lift out the old camera module.
• Insert the new camera module and reconnect the ribbon cable.
• Reassemble the back frame and secure it with the screws.
• Reinsert the battery and back cover.
• Turn on the phone and open the camera app to verify the new module works correctly.