Touch screen

Technical Characteristics of Pantalla Táctil Own

The Pantalla Táctil Own is a sleek and robust touch screen designed for smartphones. Here are its key technical characteristics:

• Screen Size: 6.5 inches
• Resolution: 1080 x 2400 pixels
• Technology: OLED
• Touch Sensitivity: Capacitive Multi-touch
• Brightness: 500 nits (peak)
• Color Depth: 16 million colors
• Protective Glass: Corning Gorilla Glass 5
• Compatibility: Compatible with various models of smartphones

Instructions to Replace Pantalla Táctil Own

Replacing the Pantalla Táctil Own requires careful handling and patience. Follow these detailed steps to ensure a successful replacement:

Tools Needed

• Plastic opening tools
• Suction cup tool
• Small Phillips screwdriver
• Spudger
• Tweezers
• Heat gun or hairdryer
• Adhesive strips

Step-by-Step Instructions

1. Preparation

• Ensure the device is powered off completely.
• Remove any SIM cards, memory cards, and the battery (if possible).
• Place the device on a clean, flat workspace.

2. Removing the Back Cover

• Use a heat gun or hairdryer to soften the adhesive around the back cover.
• Gently insert a plastic opening tool or spudger between the back cover and the phone frame.
• Carefully slide the tool along the edges to release the clips securing the back cover.
• Lift the back cover slowly to avoid damaging any cables.

3. Disconnecting the Battery

• Locate the battery connector on the motherboard.
• Use a spudger or tweezers to disconnect the battery connector from the motherboard.
• This step ensures no power runs through the device during the repair.

4. Removing the Old Screen

• Apply heat around the edges of the screen to soften the adhesive.
• Use a suction cup to lift the screen slightly.
• Insert a plastic opening tool or spudger between the screen and the frame.
• Carefully work your way around the edges to release the adhesive, avoiding any flex cables.
• Gently lift the screen and disconnect any flex cables attaching it to the motherboard.

5. Installing the New Screen

• Align the new screen with the frame and connect any necessary flex cables to the motherboard.
• Carefully place the new screen into the frame, ensuring it is properly aligned.
• Press the edges firmly to secure the adhesive.

6. Reassembling the Device

• Reconnect the battery connector to the motherboard.
• Place the back cover onto the device and press firmly around the edges to secure the adhesive.
• Screw any screws back into place that were removed during disassembly.

7. Final Steps

• Power on the device to ensure the new screen is working correctly.
• Reinsert any SIM cards and memory cards that were removed.
• Test the touchscreen functionality to confirm proper installation.

By following these instructions, you should be able to successfully replace the Pantalla Táctil Own on your smartphone. Always take care and proceed gently to avoid damaging any components.