Philips S399 spare parts

Technical Characteristics of Philips S399 Repuestos

The Philips S399 is a durable smartphone with replaceable parts, known as ""repuestos."" Here are the technical characteristics of some of the key repuestos for the Philips S399:

1. Screen

• Type: IPS LCD capacitive touchscreen
• Size: 5.0 inches
• Resolution: 720 x 1280 pixels
• Protection: Scratch-resistant glass

2. Battery

• Type: Li-Ion
• Capacity: 2300 mAh
• Replaceable: Yes

3. Camera Module

• Main Camera: 8 MP, autofocus, LED flash
• Front Camera: 2 MP

4. Housing and Buttons

• Material: Plastic with metallic finish
• Buttons: Volume, Power, Home

Instructions for Replacing Philips S399 Repuestos

Replacing the repuestos on your Philips S399 can help restore its functionality. Below are the detailed steps for replacing various parts:

Replacing the Screen

• Step 1: Power off the device and remove the battery.
• Step 2: Use a small Phillips-head screwdriver to remove the screws securing the back cover.
• Step 3: Gently pry open the back cover using a plastic opening tool.
• Step 4: Disconnect the screen connector by carefully lifting the latch.
• Step 5: Remove the old screen and place the new screen in its position.
• Step 6: Reconnect the screen connector and ensure the latch is secure.
• Step 7: Reattach the back cover and secure it with the screws.
• Step 8: Insert the battery and power on the device to test the new screen.

Replacing the Battery

• Step 1: Power off the device and remove any protective case.
• Step 2: Remove the back cover by gently prying it open with a plastic opening tool.
• Step 3: Lift the old battery out of its compartment.
• Step 4: Align the new battery with the connectors and place it into the compartment.
• Step 5: Replace the back cover.
• Step 6: Power on the device to ensure the new battery is working correctly.

Replacing the Camera Module

• Step 1: Power off the device and remove the back cover by unscrewing the screws.
• Step 2: Locate the camera module and disconnect it by lifting the small latch.
• Step 3: Remove the old camera module by gently prying it out.
• Step 4: Align the new camera module and place it in position.
• Step 5: Reconnect the camera module by securing the latch.
• Step 6: Reattach the back cover and secure it with the screws.
• Step 7: Power on the device and test the new camera to ensure it is functioning.

Replacing Housing and Buttons

• Step 1: Power off the device and remove the back cover by unscrewing the screws.
• Step 2: Remove the battery to prevent any electrical issues.
• Step 3: Disconnect any cables connected to the buttons or housing.
• Step 4: Carefully pry open the housing using a plastic tool, ensuring not to damage any internal parts.
• Step 5: Replace the old housing and buttons with new ones, ensuring proper alignment.
• Step 6: Reconnect any cables and secure the housing with the screws.
• Step 7: Insert the battery and replace the back cover.
• Step 8: Power on the device to verify that all buttons and the housing are properly installed.