Prestigio Multiphone Pap 3400 spare parts

Prestigio Multiphone PAP 3400 Technical Characteristics

The Prestigio Multiphone PAP 3400 is a budget-friendly smartphone that delivers essential features for everyday use. Below are its technical specifications:

Technical Specifications

• Display: 4.0 inches, 480 x 800 pixels resolution
• Processor: Dual-core 1.3 GHz
• RAM: 512 MB
• Storage: 4 GB (Expandable via microSD up to 32 GB)
• Camera: 5 MP rear camera, 0.3 MP front camera
• Battery: 1400 mAh removable battery
• Operating System: Android 4.2 (Jelly Bean)
• SIM: Dual SIM (Micro-SIM)

Replacement Instructions for Prestigio Multiphone PAP 3400 Parts

General Instructions

Replacing parts on the Prestigio Multiphone PAP 3400 requires the right tools and careful attention to detail. Ensure you have a clean workspace and follow the steps outlined for each specific part replacement.

Tools Required

• Small Phillips screwdriver
• Plastic prying tools
• Tweezers
• Small suction cup (for screen removal)

Step-by-Step Replacement Instructions

1. Battery Replacement:

• Power off the phone and remove the back cover by prying it open with a plastic tool.
• Remove the battery by lifting it from the bottom edge.
• Insert the new battery and ensure it is seated properly.
• Replace the back cover and power on the phone to check the new battery.

2. Screen Replacement:

• Power off the phone and remove the battery and any SIM/memory cards.
• Use a Phillips screwdriver to remove all screws from the back of the phone.
• Carefully pry open the back case using a plastic prying tool.
• Disconnect any visible connectors or ribbon cables cautiously.
• Use a small suction cup on the front screen to gently lift the screen assembly.
• Gently separate the screen from the frame, ensuring not to damage any components.
• Place the new screen onto the frame and reconnect all previously disconnected components.
• Reassemble the phone by reversing the steps, reinstalling screws, and securing the back cover.
• Power on the phone to ensure the new screen is functioning correctly.

3. Camera Replacement:

• Power off the phone and remove the back cover and battery.
• Use a Phillips screwdriver to remove screws securing the internal components.
• Carefully detach the internal frame to access the camera module.
• Disconnect the camera module from its connector using tweezers.
• Replace with the new camera module, ensuring it is connected securely.
• Reassemble the phone by reversing the steps, including securing the frame and back cover.
• Power on the phone to test the new camera.

Follow these steps meticulously for a successful replacement of parts on your Prestigio Multiphone PAP 3400. If you encounter difficulties, consider consulting a professional technician.