Prestigio Multiphone Pap 4044 spare parts

Technical Characteristics of Prestigio Multiphone Pap 4044 Repuestos

The Prestigio Multiphone PAP 4044 device, known for its robust build and efficient performance, requires high-quality repuestos (replacement parts) to maintain its functionality. The primary components of the Prestigio Multiphone PAP 4044 include:

• Display Screen: 4-inch Capacitive LCD with 480 x 800 pixels resolution
• Battery: 1500 mAh Li-Ion
• Camera: 8 MP rear camera with autofocus and LED flash
• Processor: Dual-core 1.2 GHz
• RAM: 512 MB
• Operating System: Android 4.1 (Jelly Bean)

Instructions to Replace Prestigio Multiphone Pap 4044 Repuestos

1. Replacing the Display Screen

Required Tools: Phillips screwdriver, plastic opening tool, tweezers

• Power off the phone and remove the back cover and battery using the phillips screwdriver.
• Detach the screws securing the motherboard and gently lift it out with a plastic opening tool.
• Carefully disconnect the display screen ribbon cable using tweezers.
• Remove the faulty display screen and replace it with a new one by connecting the ribbon cable back in place.
• Reassemble the motherboard, securing it with screws, then reinsert the battery and back cover.
• Power on the device to check if the new screen functions correctly.

2. Replacing the Battery

Required Tools: None

• Power off the phone and remove the back cover with your fingers.
• Gently lift and remove the old battery from its compartment.
• Insert the new battery, making sure it is properly aligned with the connectors.
• Replace the back cover and power on the device to ensure the battery is working.

3. Replacing the Camera Module

Required Tools: Phillips screwdriver, plastic opening tool, tweezers

• Power off the phone and remove the back cover and battery with the phillips screwdriver.
• Undo the screws holding the motherboard in place and gently lift it out using the plastic opening tool.
• Locate the camera module and disconnect its ribbon cable with tweezers.
• Remove the faulty camera module and replace it with a new one by connecting the ribbon cable securely.
• Reassemble the motherboard, secure it with screws, and reinsert the battery and back cover.
• Power on the phone and test the new camera for proper functionality.