Touch screen

Technical Characteristics of Pantalla Táctil

Resolution: 1080 x 2400 pixels

Size: 6.5 inches

Technology: IPS LCD

Aspect Ratio: 20:9

Touchscreen Type: Capacitive Multi-touch

Brightness: 500 nits

Protection: Corning Gorilla Glass

Color Gamut: 98% sRGB

Refresh Rate: 90 Hz

Instructions to Replace Pantalla Táctil

Tools Needed

• Screwdriver set (Phillips and pentalobe)
• Plastic opening tools
• Suction cup
• Spudger
• Pry tool
• Antistatic wrist strap
• Tweezers
• Adhesive tape

Step-by-Step Instructions

Step 1: Power Off the Device

Ensure that your device is completely powered off before beginning any repair work to prevent any electrical damage.

Step 2: Remove the Back Cover

Use a plastic opening tool to gently pry off the back cover of the device. Move slowly and carefully to avoid damaging the internal components or the cover.

Step 3: Disconnect the Battery

Locate the battery connector and use a spudger to disconnect it. This will ensure that no power is running through the device while you perform the replacement.

Step 4: Remove Screws and Midframe

Using the appropriate screwdriver (typically a Phillips or pentalobe), remove all screws securing the midframe. Carefully lift the midframe away from the device to expose the internal components.

Step 5: Disconnect Flex Cables

Using tweezers or a spudger, carefully disconnect all flex cables connected to the pantalla táctil. These may include digitizer and display cables.

Step 6: Remove the Old Pantalla Táctil

Apply a suction cup to the front of the pantalla táctil. Gently pull up on the suction cup while using a plastic pry tool to separate the screen from the frame. Move slowly to avoid breaking the glass or damaging the internal components.

Step 7: Clean Adhesive Residue

Once the old pantalla táctil is removed, clean any remaining adhesive residue from the frame using a spudger or tweezers. Ensure the surface is smooth and clean to apply the new pantalla táctil.

Step 8: Install the New Pantalla Táctil

Carefully align the new pantalla táctil with the frame. Press down gently to ensure it adheres properly. Reconnect all flex cables to their respective connectors.

Step 9: Reassemble the Device

• Place the midframe back onto the device and secure it with the screws removed earlier.
• Reconnect the battery connector.
• Replace the back cover, ensuring it snaps securely into place.

Step 10: Power On and Test

Power on the device and test the new pantalla táctil to ensure it is functioning correctly. Check for responsiveness and display issues.

Congratulations, you have successfully replaced the pantalla táctil!