Realme 10S spare parts

Realme 10S Repuestos Technical Characteristics

The Realme 10S smartphone comprises numerous parts, collectively referred to as 'repuestos', and these repuestos play a significant role in its performance, user experience, and overall functionality. Here are the prominent technical characteristics:

• Display: Super AMOLED, 90Hz, HDR10+, 6.4 inches, 1080 x 2400 pixels.
• Processor: MediaTek Helio G95 (12 nm).
• Memory: 64GB/6GB RAM, 128GB/8GB RAM; UFS 2.1.
• Battery: Li-Po 5000 mAh, Non-removable, Fast charging 30W.
• Camera: Quad Camera with 64 MP main sensor, LED flash, HDR, panorama capable.
• Connectivity: Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.0, GPS/A-GPS, USB Type-C 2.0.

Replacing Realme 10S Repuestos

Tools Required

The following tools are required to replace the Realme 10S repuestos:

• Sim Card Ejector.
• Screwdriver.
• Plastic Opening Tool.
• Tweezer.

Instructions

Follow these steps to replace Realme 10S repuestos:

1. Turn off the device and remove the SIM tray with a SIM Card Ejector.
2. Remove all visible screws. Using a Plastic Opening Tool, gently wedge it between the screen and chassis, prying it open.
3. Disconnect the battery connector using tweezers.
4. Identify the faulty repuesto (part) to replace (camera, battery, etc.). Remove more screws if necessary, and disconnect the necessary ribbon cables.
5. Remove the faulty part and replace it with the new one. Ensure the new repuesto is properly connected.
6. Reconnect the battery, and assemble the phone in reverse order, making sure to replace all screws.
7. Turn on your phone to check if the replaced repuesto is functioning correctly.

Note: This is a basic guide. Procedures may vary slightly depending on the specific repuesto being replaced. Always ensure your device is off before attempting repairs and never force parts apart.