Realme 11 5G RMX3780 spare parts

    There are 18 products.

    Technical Characteristics of Realme 11 5G RMX3780 Repuestos

    The Realme 11 5G RMX3780 repuestos consist of various components to keep your device in perfect condition. Here are the primary technical specifications:

    • Display: Multi-Touch OLED, 6.52 inches, 720 x 1600 pixels resolution
    • Battery: Non-removable Li-Po 5000 mAh battery
    • Camera: R...

    Technical Characteristics of Realme 11 5G RMX3780 Repuestos

    The Realme 11 5G RMX3780 repuestos consist of various components to keep your device in perfect condition. Here are the primary technical specifications:

    • Display: Multi-Touch OLED, 6.52 inches, 720 x 1600 pixels resolution
    • Battery: Non-removable Li-Po 5000 mAh battery
    • Camera: Rear - 64 Megapixels, Front - 16 Megapixels
    • Processor: Octa-core (2x2.4 GHz Kryo 475 Prime & 6x1.8 GHz Kryo 475 Silver)
    • Storage: Internal - 128GB, Expandable via MicroSD
    • Operating System: Android 10, Realme UI

    Instructions for Replacing Realme 11 5G RMX3780 Repuestos

    Follow the detailed steps to replace your Realme 11 5G RMX3780 repuestos:

    Equipment Needed

    • Screwdriver Set
    • Opening Tools
    • Tweezers

    Step-by-Step Guide

    Disclaimer: Proceed at your own risk. This process may void your warranty.

    1. Turn off the device

    Make sure to switch off your Realme 11 5G RMX3780 repuestos before you start the disassembly process.

    2. Remove the Rear Cover

    Use a heat gun or hair dryer to heat the edges of the rear cover, then gently pry it open using the opening tool. Be careful not to damage any internal components.

    3. Remove the Battery

    Remove the screws securing the battery connector. Then, carefully lift the battery using the pry tool and remove it from the phone.

    4. Replace the Faulty Component

    Depending on the part you're replacing, the specific steps will vary. It’s always important to remember to put the new part in the same way the old one was positioned.

    5. Reassemble the Phone

    After replacing the defective part, reassemble the phone in reverse order of disassembly. Make sure to put back all screws and connectors in their original places.

    Once the device is reassembled, turn it on to check functionality.

    6. Post-Replacement Testing

    After the repair, ensure that all functions of the device are working properly, including touch, display, camera, buttons, and signal reception.

    Less
    More
    Showing 1 - 18 of 18 items