Realme C20 Spare Parts

Technical Characteristics of Realme C20 Repuestos

The Realme C20 Repuestos, or replacements parts in English, primarily consist of various components like the display screen, the battery, the motherboard, rear and front cameras, speakers, etc. Each component plays a crucial role in the device's overall functionality and has the following technical specifications:

• Display Screen: The replacement screen of a Realme C20 is a 6.5 inches, IPS LCD with a resolution of 720 x 1600 pixels.
• Battery: The Realme C20 comprises a Li-Po 5000 mAh, non-removable battery as a replacement part.
• Motherboard: The device's motherboard houses the MediaTek Helio G35 (12 nm) chipset.
• Cameras: The replacement cameras include an 8 MP, f/2.0, 26mm (wide), 1/3.2", AF rear camera and a 5 MP, f/2.2, (wide) front camera.
• Speakers: Realme C20 has loudspeakers without stereo speakers.

Instructions for Replacing Realme C20 Repuestos

Please follow the given directions with caution. Working with electronic devices can be precarious; ensuring all safety measures is a necessity.

Tools Needed

• Small Phillips-head Screwdriver
• Plastic Opening Tools
• Tweezers
• Heat Gun or Hair Dryer

Disassembly and Replacement Instructions

Hereinbelow are the specified steps on how to replace Realme C20 Repuestos:

1. Power off the Realme C20 before starting the disassembly process to avoid any electrical mishap.
2. Slowly heat the edges of the back cover with a heat gun or hairdryer at low settings, to soften the adhesive.
3. Insert a plastic opening tool or thin prying tool between the back cover and the frame, and gently work around the phone to separate the back cover.
4. Unscrew the screws which are fastening the frame and carefully remove it using the tweezers.
5. Disconnect the battery connector that links the battery to the motherboard.
6. Depending on the part you are replacing, disconnect the relevant connectors from the motherboard and carefully remove the part.
7. Replace the old part with Realme C20 Repuestos. Make sure the part is fixed correctly.
8. Reconnect the connectors to the motherboard and fasten the frame using the screws.
9. Replace the back cover to its original position, making sure it fits perfectly and evenly on all sides.
10. Power on your phone to test if the replaced component is functioning correctly.

If the phone does not function properly after the parts have been replaced, immediately contact a professional or your service provider.