Realme C21 spare parts

Realme C21 Technical Specifications

The Realme C21 is a budget-friendly smartphone that doesn't compromise on features or performance. Below are some of its key technical characteristics.

• Processor: MediaTek Helio G35
• RAM: 3GB/4GB
• Storage: 32GB/64GB, expandable up to 256GB
• Display: 6.5-inch HD+ display
• Battery: 5000mAh
• Camera: Triple rear camera (13MP+2MP+2MP) & 5MP front camera
• OS: Realme UI based on Android 10

Replacement of Realme C21 Parts (Repuestos)

It is crucial that you have the right tools and parts before you proceed. This guide assumes that you already have acquired the necessary Realme C21 repuestos. Here are detailed instructions for replacing key components:

Battery Replacement

Ensure the device is powered off before starting the replacement process.

• Step 1: On the back of the phone, gently pry the case open.
• Step 2: Locate the battery connector and carefully disconnect it.
• Step 3: Remove the screws holding the battery in place, then gently lift out the battery.
• Step 4: Place your replacement battery in the space, secure it with the screws, and reconnect the battery connector.
• Step 5: Reattach the back case.

Screen Replacement

Follow these steps to replace a damaged screen:

• Step 1: With the phone powered off, remove the back case as described in the battery replacement section.
• Step 2: Disconnect the screen connector carefully.
• Step 3: Remove the screws holding the screen in place and lift out the damaged screen.
• Step 4: Place your new screen into position, secure it with the screws, and reconnect the screen connector.
• Step 5: Reattach the back case.

Note: Please exercise utmost care while handling the phone internals as they are fairly delicate and could get damaged easily.

Camera Replacement

Follow the same initial steps in the screen replacement process.

• Step 1: After opening the back case, locate the camera module.
• Step 2: Carefully disconnect the camera's ribbon cable.
• Step 3: Remove the screws holding the camera module in place and lift out the camera.
• Step 4: Insert your new camera module, secure it with the screws, and reconnect the ribbon cable.
• Step 5: Reattach the back case.

Remember to test the device throughly after completion of the replacement process to ensure everything works as expected.