Realme C25s spare parts

    There are 12 products.

    Technical Characteristics of Realme C25s Repuestos

    The Realme C25s smartphone components, also known as repuestos, have the following technical characteristics:

    • Screen: 6.5-inch IPS LCD, HD+ (1600 x 720 pixels) resolution, 20:9 aspect ratio.
    • Processor: MediaTek Helio G85, 12nm Octa-core.
    • Memory: 4GB RAM, 128GB storage.
    • Battery: 6000mAh with 18...

    Technical Characteristics of Realme C25s Repuestos

    The Realme C25s smartphone components, also known as repuestos, have the following technical characteristics:

    • Screen: 6.5-inch IPS LCD, HD+ (1600 x 720 pixels) resolution, 20:9 aspect ratio.
    • Processor: MediaTek Helio G85, 12nm Octa-core.
    • Memory: 4GB RAM, 128GB storage.
    • Battery: 6000mAh with 18W fast charging.
    • Operating System: Realme UI based on Android 11.

    Instructions for Replacing Realme C25s Repuestos

    Before proceeding with the following steps, ensure you have the necessary tools available, such as a set of precision screwdrivers, a prying tool, and a suction cup.

    Open the Device

    • Power off your Realme C25s smartphone and remove the SIM card tray.
    • Heat the device edges to soften the adhesive that attaches the back cover to the phone frame.
    • Use a suction cup to create a gap between the back cover and the frame. Insert a prying tool in the gap and slide around the edges to detach the back cover completely.

    Remove the Battery

    • Unscrew the screws securing the battery connector cover and remove the cover.
    • Disconnect the battery connector from the motherboard.
    • Lift and remove the battery from the phone.

    Replace the Necessary Parts

    • At this point, you can replace various Realme C25s repuestos, such as the screen, camera, or any other component. Please refer to specific instructions for each part replacement.

    Reassemble the Device

    • After replacing the necessary parts, reinsert the battery and reconnect it to the motherboard.
    • Replace the battery connector cover and screw it back into place.
    • Align the back cover with the frame and press firmly until it snaps back into place. Make sure there are no gaps to ensure a secure fit.
    • Insert the SIM card tray and power on the device.

    Note: Always proceed with caution when disassembling and reassembling your device to avoid breaking any components.

    Less
    More
    Showing 1 - 12 of 12 items