Realme Narzo 50 4G RMX3286 spare parts

    There are 13 products.

    Realme Narzo 50 4G RMX3286 Specifications

    The Realme Narzo 50 4G RMX3286 is known for its impressive hardware and excellent performance. Here are its key technical details:

    • Display: 6.5-inch IPS LCD, 720 x 1600 pixels
    • Processor: MediaTek Helio G85 (12nm)
    • RAM: 4GB/6GB
    • Storage: 64GB/128GB, expandable up to 256GB via microSD card
    • Camera: Triple-Re...

    Realme Narzo 50 4G RMX3286 Specifications

    The Realme Narzo 50 4G RMX3286 is known for its impressive hardware and excellent performance. Here are its key technical details:

    • Display: 6.5-inch IPS LCD, 720 x 1600 pixels
    • Processor: MediaTek Helio G85 (12nm)
    • RAM: 4GB/6GB
    • Storage: 64GB/128GB, expandable up to 256GB via microSD card
    • Camera: Triple-Rear Camera, 50MP main, 2MP macro, 2MP depth; Front Camera, 16MP
    • Battery: 6000mAh, 18W fast charging

    Instructions for Replacing Realme Narzo 50 4G RMX3286 Repuestos

    As a mobile repair specialist, the task of replacing the spare parts of the Realme Narzo 50 4G RMX3286 might be challenging yet doable. Follow these steps carefully:

    Tools Needed

    • Screwdriver set
    • Plastic pry tool
    • Ejection pin
    • Heat gun or hair dryer

    Disassembly

    Before starting, make sure to turn off the phone and remove the SIM card tray.

    1. Using a heat gun, heat the edges of the back cover to soften the adhesive.
    2. Insert a plastic pry tool and slide it around the edges to create a gap. Carefully lift the back cover.
    3. Remove the screws holding the plastic shield in place and lift it off.
    4. Disconnect the battery connector from the motherboard to cut power to the device.

    Replacing the Needed Parts

    Depending on the component you want to replace, proceed with the appropriate steps:

    • Camera Module: Unclip the connector, unscrew if necessary, and remove the old module. Replace with the new one and re-attach the connector.
    • Battery: Insert the pry tool under the battery and gently lift it out. Fit the new battery in place and connect it to the motherboard.
    • Display: Disconnect the connectors, unscrew if necessary, and remove the display. Attach the new display and reconnect the connectors.

    Reassembly

    Re-assemble the device in reverse order. Make sure all screws and connectors are secured and the device powers on correctly.

    NB: Always take care when repairing devices. If not confident, seek professional assistance.

    Less
    More
    Showing 1 - 13 of 13 items