Samsung Galaxy A9 Pro 2016 A9100 spare parts

    There are 4 products.

    Samsung Galaxy A9 Pro 2016 A9100 Repuestos Specifications

    The Samsung Galaxy A9 Pro 2016 A9100 is a powerful smartphone released in mid-2016. The handset boasts an array of appealing features that make it a reliable and efficient device. This section outlines some of its key specifications:

    • Size: 161.7 x 80.9 x 7.9 mm.
    • Display: 6.0 inches,...

    Samsung Galaxy A9 Pro 2016 A9100 Repuestos Specifications

    The Samsung Galaxy A9 Pro 2016 A9100 is a powerful smartphone released in mid-2016. The handset boasts an array of appealing features that make it a reliable and efficient device. This section outlines some of its key specifications:

    • Size: 161.7 x 80.9 x 7.9 mm.
    • Display: 6.0 inches, Super AMOLED.
    • Resolution: 1080 x 1920 pixels.
    • Operating System: Android 6.0.1 (Marshmallow), upgradable to 8.0 (Oreo).
    • Processor: Qualcomm MSM8976 Snapdragon 652.
    • Memory: 32GB 4GB RAM.
    • Camera: 16 MP, f/1.9, OIS, autofocus, LED flash.

    Replacing Samsung Galaxy A9 Pro 2016 A9100 Repuestos

    The following instructions will guide you on how to effectively replace the components ('repuestos') of your Samsung Galaxy A9 Pro 2016 A9100:

    Tools Needed

    • Small Phillips screwdriver
    • Tweezers
    • Plastic opening tools
    • Heat gun or hairdryer

    Step-by-Step Guide

    Prior to starting, ensure your device is powered off and unplugged from any power source. Here are the replacement steps:

    • Remove the back cover

      Heat the edges of the device for about a minute or two in order to melt the adhesive holding the back cover. Using a plastic opening tool, gently pry open the back cover all around the phone.

    • Remove the battery

      Unscrew the screws holding the battery in place using your Phillips screwdriver. Once the screws are out, use the tweezers to carefully lift the battery out of the smartphone.

    • Replace the desired part

      Identify the part you wish to replace and unscrew where necessary, gently lift the component out using the tweezers and then place the new part in the correct position. Screw back the part as needed.

    • Reassemble your device

      Once you've successfully swapped the part, reassemble your device in reverse order. Make sure to secure the back cover after ensuring it’s properly aligned.

    Please proceed with caution and remember that you undertake these repairs at your own risk. If you find it complicated, it's recommended to consult or hire a professional to avoid causing more damage to the device.

    Less
    More
    Showing 1 - 4 of 4 items