Samsung Galaxy Core 4g LTE G3518 spare parts
There are 3 products.Samsung Glaxy Core 4g LTE G3518 Technical Specifications
The Samsung Glaxy Core 4g LTE G3518 is a versatile mobile device that boasts impressive technical specifications:
- Processor: Qualcomm Snapdragon 410
- RAM: 1GB
- Storage: 8GB (expandable)
- Display: 4.5-inch multitouch screen
- Resolution: 540x960 pixels
- Camera: 5-megapixel primary camera...
Samsung Glaxy Core 4g LTE G3518 Technical Specifications
The Samsung Glaxy Core 4g LTE G3518 is a versatile mobile device that boasts impressive technical specifications:
- Processor: Qualcomm Snapdragon 410
- RAM: 1GB
- Storage: 8GB (expandable)
- Display: 4.5-inch multitouch screen
- Resolution: 540x960 pixels
- Camera: 5-megapixel primary camera and 2-megapixel front camera
- Battery: 2000mAh
- OS: Android 4.4.2
- Connectivity: 4G LTE support, WiFi, Bluetooth, microUSB 2.0
How to Replace the Battery for the Samsung Glaxy Core 4g LTE G3518
Carrying out a battery replacement requires careful attention. Please follow these steps:
- Ensure your device is powered off: Hold down the power button and confirm to turn it off.
- Remove the back cover: Locate the small notch on the edge of the phone and gently pry the back cover off using your fingernails or a thin plastic tool.
- Remove the battery: Use a small plastic spudger to lift the battery from the bottom up and away from the phone.
- Insert the new battery: Place the new battery in the phone with the contacts aligned to the pins in the battery compartment. Press down gently to secure it in place.
- Replace the cover: Align the back cover with the phone and press firmly until it clicks into place on all sides.
How to Replace the Screen for the Samsung Glaxy Core 4g LTE G3518
A broken screen can be an infuriating issue, but it can be replaced by following these steps:
- Turn off the device: Press and hold the power button and confirm the action.
- Remove the back cover and the battery: Refer to the previous instructions on how to do this.
- Detach the screen: You'll need a small screwdriver to remove any screws holding the screen in place. Once all screws have been removed, use a thin plastic tool to carefully pry the screen up from the body of the phone.
- Replace the screen: Place the new screen onto the phone, aligning it properly. Secure it with the screws that were previously removed.
- Reassemble the device: Insert the battery and secure the back cover in place.
Please exercise caution while carrying out these procedures. If not carried out properly, additional damage may occur that could potentially void your warranty or render your device irreparable. If you are not confident, it is highly recommended to consult or hire a professional repair service.
Less More
Disponible
Disponible
Disponible