Samsung Galaxy j200 spare parts

Samsung Galaxy J200 Repuestos Technical Characteristics

The Samsung Galaxy J200 or J2, as it's most commonly known, is a smartphone developed by Samsung Electronics. It uses parts, or repuestos, that can be replaced should they malfunction or break. Here are some key technical specifications of the Samsung Galaxy J200 repuestos:

• Screen: TFT capacitive touchscreen, 16M colors
• Screen Size: 4.7 inches, 60.9 cm2 (~64.7% screen-to-body ratio)
• Resolution: 540 x 960 pixels, 16:9 ratio (~234 ppi density)
• Battery: Removable Li-Ion 2000 mAh battery
• Camera: 5 MP, f/2.2, AF rear camera and 2 MP, f/2.4 front-facing camera
• Processor: Quad-core 1.3 GHz Cortex-A7
• Memory: 8GB 1GB RAM

Instructions on How to Replace Samsung Galaxy J200 Repuestos

Here are step-by-step instructions on how to replace Samsung Galaxy J200 repuestos:

Tools Needed:

• Phillips screwdriver
• Pry tool
• Tweezers

Instructions:

Step 1: Power off your Samsung Galaxy J2. Remove the back cover and battery.

Step 2: Use a Phillips screwdriver to remove all the screws on the back frame. Once all the screws are out, use the pry tool to safely remove the frame.

Step 3: You will now have access to the motherboard. Detach all the cables and connectors attached to the board and remove any screws securing it. Slowly lift up the motherboard and set it aside.

Step 4: If you're replacing the screen, now would be the time to carefully remove the old screen with your pry tool. The display assembly is held by light adhesive, so gently heat up the screen and use your pry tool to remove the screen from the frame.

Step 5: Place the new screen in the frame.

Step 6: Reassemble the phone, carefully placing back the motherboard, reattaching all cables and connectors, placing the back frame into its original position and screwing it back into place. Lastly, replace the battery and back cover.

Note: The steps might slightly vary based on the part to be replaced. It is always recommended to consult a professional if you're unsure about doing the replacement yourself.