Samsung Galaxy M20 M205 spare parts

Samsung Galaxy M20 M205 Repuestos: Technical Characteristics

Before proceeding with any replacement process, it's essential to understand the technical characteristics of the Samsung Galaxy M20 M205 Repuestos. Being aware of these features can significantly simplify the procedure.

• Display: 6.3" PLS TFT capacitive touchscreen, 16M colors
• Resolution: 1080 x 2340 pixels
• Operating System: Android 8.1 (Oreo), upgradable to Android 10, One UI 2.0
• Processor: Exynos 7904 (14 nm)
• Memory: MicroSDXC (dedicated slot) or Internal 32GB 3GB RAM, 64GB 4GB RAM
• Camera: Dual - 13 MP, f/1.9, 1/3.1", 1.12µm, PDAF and 5 MP, f/2.2, 12mm (ultrawide)
• Battery: Non-removable Li-Po 5000 mAh battery

Instructions on How to Replace Samsung Galaxy M20 M205 Repuestos

Follow the step-by-step instructions below to replace parts on your Samsung Galaxy M20 M205. Always remember to turn off your phone and remove the SIM card and memory card before starting the replacement process.

Step 1: Removing the Back Cover

To start off, you'll need to remove the back cover. Using a heat gun, gently warm the edges of the back cover to loosen the adhesive. Use a suction cup and plastic opening tools to lift and remove the back cover.

Step 2: Remove the Battery

Once the back cover is removed, proceed to disconnect the battery connector. Remove all screws securing the battery and gently lift the battery out of the phone.

Step 3: Replacing the Component

In this step, identify the component that requires replacement. Disconnect the damaged part and install the new one. Ensure that all the connectors are secured well.

Step 4: Reassembling the Phone

After replacing the component, reattach the battery and secure it with the screws previously removed. Apply new adhesive if necessary and reattach the back cover.

Step 5: Test the Phone

Power on the phone to ensure that the replaced component is working as expected. If there are any issues, ensure that all the connectors are secured well.