Samsung Galaxy M40 M405 spare parts

Samsung Galaxy M40 M405 Repuestos Technical Characteristics

The Samsung Galaxy M40 M405 repuestos have several technical features that confirm its authenticity. Have a look below to get familiar with all the characteristics.

• Screen: TFT capacitive touchscreen, 16M colours, resolution of 1080 x 2340 pixels, 6.3 inches size, and Corning Gorilla Glass for protection.
• Battery: Non-removable Li-Po 3500 mAh battery.
• Camera: Triple camera setup with 32 MP (wide) + 8 MP (ultrawide) + 5 MP (depth).
• Memory: Two variants with internal 64 GB 4 GB RAM or 128 GB 6 GB RAM.

Instructions to Replace Samsung Galaxy M40 M405 Repuestos

Tools Needed

• Phillips #00 Screwdriver
• Plastic opening tool
• Tweezers

Step-by-Step Guide

Before starting, ensure that the phone is powered off!

Step 1: Remove the back cover

Start by heating the back cover edges using a heat gun or hair dryer to loosen the adhesive. Use a plastic opening tool to pry and lift the back cover gently. Be patient, as this step requires precision to avoid damaging the phone.

Step 2: Unscrew the plate

Using a Phillips #00 Screwdriver, remove the 12 screws securing the mid-frame. Next, lift the mid-frame from the sides and detach it from the phone.

Step 3: Disconnect the battery

Locate the battery connector and use a plastic opening tool to disconnect it from the motherboard.

Step 4: Replace the desired part

Following the same set of instructions, replace the part you wish with a new Samsung Galaxy M40 M405 repuesto as per your requirements.

Step 5: Reassemble the phone

Follow the process described above in reverse order to assemble your phone back together.

Ensure that every screw is in place and all the connectors are attached firmly to the logic board before switching on the phone.