Samsung Galaxy M52 SM-M526 5G spare parts

Samsung Galaxy M52 SM-M526 5G Repuestos Technical Specifications

The Samsung Galaxy M52 5G repuestos comprises several key parts, each with their unique specifications. Some of the main ones are:

• Screen: This device features a Super AMOLED Plus capacitive touchscreen with 16M colors. Its size is 6.7 inches, and it comes with a resolution of 1080 x 2400 pixels.
• Battery: It hosts a Non-removable Li-po 5000mAh battery.
• Back Cover: It has a plastic back cover that is securely attached to the main frame of the phone.
• Camera: It features 64 MP(wide), 12 MP(ultra wide), 5 MP(macro), and 5 MP(depth) for the rear camera setup and 32mp wide camera on the front.

Instructions to Replace Samsung Galaxy M52 SM-M526 5G Repuestos

Before we start, ensure you have the correct tools for this operation.

• Screwdrivers
• Tweezers
• Opening tools
• Heat gun/Hair Dryer
• New spare part

Screen Replacement

• Step 1: Turn off your device to prevent any electrical mishap.
• Step 2: Apply mild heat to the edges of the screen with a heat gun or hairdryer to loosen the adhesive. Make sure not to overheat the screen as this could cause permanent damage.
• Step 3: Gently insert an opening tool between the screen and the frame, carefully moving around the edges to separate the screen.
• Step 4: Once separated, slowly lift the screen, disconnect the connectors attached to the motherboard using a set of tweezers.
• Step 5: Now, you can replace it with a new screen and reassemble the device, reversing the disassembly process.

Battery Replacement

• Step 1: Turn off your device.
• Step 2: Remove the phone's back cover by heating the edges and then using an opening tool to pry it away from the frame.
• Step 3: Remove the screws from the protective shield covering the battery connector and then disconnect the battery connector with tweezers.
• Step 4: Remove the adhesive underneath the battery or use a suction cup if available to lift the battery out of its compartment.
• Step 5: Place a new battery into the compartment, connect the connector, and replace the protective shield, reversing the disassembly steps to reassemble your device.

Please note: If you're not confident in conducting the replacement procedures, consider seeking professional help to avoid damaging the device further.