Samsung Galaxy S2 Plus I9105P spare parts

Samsung Galaxy S2 Plus I9105P Repuestos: Technical Characteristics

The Samsung Galaxy S2 Plus I9105P provides a high-powered performance due in part to its various impressive technical parts. Here are the key components:

• Display: A 4.3 inch, 480 x 800 pixels Super AMOLED Plus Capacitive Touchscreen
• Processor: Broadcom BC28155, Dual-core 1.2 GHz
• Memory: 1GB RAM with 8GB internal storage (expandable up to 64GB via a micro SD)
• Battery: Removable Li-ion battery with a capacity of 1650 mAh
• Front Camera: A 2 MP selfie camera
• Rear Camera: An 8 MP primary camera with LED flash

Instructions for Replacing Samsung Galaxy S2 Plus I9105P Repuestos

Disclaimer: Always remember to shut down your phone and remove the battery before any repair operation. Work on a clean, static-free, and well-lit surface.

Tools Needed

• Small Philips Screwdriver
• Plastic Pry tool
• Eject Pin

Step-by-Step Replacement Procedure

Step 1: First, use the eject pin to remove the SIM card and SD Card if any.

Step 2: Remove the back cover and battery from the device.

Step 3: With the small Philips screwdriver, remove all visible screws from the exposed back of the device.

Step 4: Use the plastic pry tool to gently disconnect the back frame of the phone from the front assembly.

Step 5: Carefully disconnect the Ribbon connectors. Replace the faulty part with the new one.

Step 6: Reconnect the ribbon connectors. Ensure that they are secure.

Step 7: Proceed to reassemble your device by following the disassembly steps in reverse order.

Note: The procedure can vary depending on the part that you are replacing. It is always recommended to seek professional help if you're unsure.