Samsung Galaxy S6 Active G890 spare parts

Samsung Galaxy S6 Active G890 Repuestos: Technical Characteristics

The Samsung Galaxy S6 Active G890, a robust and rugged smartphone is known for its durability and top-notch features. Below you will find the technical characteristics of its spare parts:

• Display: Super AMOLED capacitive touchscreen, 16M colors, 5.1 inches.
• Resolution: 1440 x 2560 pixels with Corning Gorilla Glass 4 protection.
• Battery: Non-removable Li-Ion 3500 mAh battery.
• Memory: 3 GB RAM with internal storage of 32GB, no microSD slot.
• Chipset: Exynos 7420 Octa (14 nm).
• Processor: Octa-core (4x2.1 GHz Cortex-A57 & 4x1.5 GHz Cortex-A53).
• Camera: 16MP main camera, 5MP front-facing camera.
• Operating System: Android 5.0.2 (Lollipop), upgradable to 7.0 (Nougat).

Guide to Replacing Samsung Galaxy S6 Active G890 Repuestos

Below you will find detailed instructions on how to replace the Samsung Galaxy S6 Active G890 spare parts. Please bear in mind that replacing parts within mobile devices should be carried out with care and precision.

Tools needed:

• Spudger
• Suction cup
• Precision tweezers
• Philips #00 Screwdriver
• Identification tape

Steps to replace parts:

• Step 1: Ensure your device is turned off. Start removing the back cover by inserting the spudger into small gaps and slowly prying up.
• Step 2: Gently remove the battery connector. Using the Philips #00 screwdriver, remove the 13 screws surrounding the midframe. Remove the middle frame with the suction cup.
• Step 3: Disconnect the display assembly by removing the screws using the same screwdriver. Carefully lift the assembly to reveal the rest of the interior.
• Step 4: Remove the connector which attaches the main and front camera. Remove the cameras gently by tapping with a spudger.
• Step 5: Systematically remove additional connectors: headphone jack, home button, and touch panel. Use tweezers for precision and tape to keep tiny screws organized.
• Step 6: Install replacement parts, ensuring each one is the correct part and properly aligned. Secure them with their respective screws.
• Step 7: Reverse the steps to reassemble your device. Remember to reconnect all details and do not force any parts.

Note: Always handle the parts gently and proceed with caution to avoid any further damage.