Samsung Galaxy Xcover Fix S5690 spare parts

    There are 4 products.

    Samsung Galaxy Xcover Fix S5690 Technical Specifications

    The Samsung Galaxy Xcover Fix S5690 is a rugged smartphone designed for use in harsh environmental conditions. Its technical characteristics include:

    • Screen: 3.65-inch TFT capacitive touchscreen
    • Resolution: 320 x 480 pixels
    • Processor: 800 MHz Marvell MG2
    • Memory: 150MB storage, expandabl...

    Samsung Galaxy Xcover Fix S5690 Technical Specifications

    The Samsung Galaxy Xcover Fix S5690 is a rugged smartphone designed for use in harsh environmental conditions. Its technical characteristics include:

    • Screen: 3.65-inch TFT capacitive touchscreen
    • Resolution: 320 x 480 pixels
    • Processor: 800 MHz Marvell MG2
    • Memory: 150MB storage, expandable up to 32GB via MicroSD
    • Camera: 3.15 MP, Auto-focus, LED flash
    • Battery: 1500 mAh
    • Operating System: Android 2.3 (Gingerbread)

    Replacing Samsung Galaxy Xcover Fix S5690 Parts

    General Safety Guidelines

    Before proceeding with the replacement of parts, ensure that you have switched off the phone and disconnected it from any power source. Make sure to handle parts with care to avoid damaging them.

    Tools needed

    • Phillips #00 Screwdriver
    • Tweezers
    • Plastic Opening tools

    Replacing the Screen

    To replace the screen of the Samsung Galaxy Xcover S5690, follow the steps below:

    1. Remove the back cover and battery.
    2. Unscrew the six screws at the back using the Phillips #00 screwdriver.
    3. Using the plastic opening tool, gently pry open the front housing from the back.
    4. Remove the screen connector from the motherboard.
    5. Replace the old screen with a new one.
    6. Reconnect the screen connector to the motherboard.
    7. Reassemble the phone by snapping on the front housing, reattaching the screws, reinstalling the battery and finally, the back cover.

    Replacing the battery

    If the battery of your Samsung Galaxy Xcover S5690 needs replacing, follow the steps below:

    1. Remove the back cover of the phone.
    2. Take out the old battery.
    3. Replace it with a new one. Make sure to align the battery properly according to the symbols inside the battery slot.
    4. Reattach the back cover.

    Note: Always replace parts with genuine Samsung parts to ensure compatibility and longevity.

    Disclaimer

    Please be advised that prolonged contact with certain smartphone components may cause mild irritation. Exercise caution at all times and ensure your workspace is well-ventilated. You are performing these repairs at your own risk.

    Less
    More
    Showing 1 - 4 of 4 items