Sony Ericsson Ion LT28I spare parts

Technical Characteristics of Sony Ericsson Ion LT28I Repuestos

The Sony Ericsson Ion LT28I is a premium smartphone that features a variety of replaceable parts, ensuring longevity and the ability to repair common issues. Below are the specifications for some of the key repuestos (spare parts):

Display

• Type: LED-backlit LCD, capacitive touchscreen, 16M colors
• Size: 4.55 inches, 57.5 cm2 (~64.7% screen-to-body ratio)
• Resolution: 720 x 1280 pixels, 16:9 ratio (~323 ppi density)
• Protection: Scratch-resistant glass

Battery

• Type: Non-removable Li-Ion 1900 mAh battery

Camera

• Primary: 12 MP, autofocus, LED flash
• Features: Geo-tagging, touch focus, face/smile detection, 3D sweep panorama, image stabilization
• Video: 1080p@30fps, continuous autofocus, video light
• Secondary: 1.3 MP

Instructions for Replacing Sony Ericsson Ion LT28I Repuestos

Replacing parts on the Sony Ericsson Ion LT28I requires basic technical skills and knowledge of its components. Follow the steps below carefully:

Replacing the Display

• Power off the device and remove the SIM card and any memory cards.
• Use a plastic opening tool to carefully pry open the back cover.
• Unscrew the screws securing the frame and remove the frame carefully.
• Disconnect the battery and other connected flex cables from the motherboard.
• Use a heat gun to gently heat around the edges of the display to soften the adhesive.
• Use a suction cup to lift the display slightly and insert a plastic card to slowly separate the display from the phone body.
• Remove the broken display and replace it with the new one, making sure to connect all flex cables properly.
• Reassemble the phone by reversing the disassembly steps.

Replacing the Battery

• Power off the device and remove the SIM card and any memory cards.
• Use a plastic opening tool to carefully pry open the back cover.
• Unscrew the screws securing the frame and remove the frame carefully.
• Disconnect the battery flex cable from the motherboard.
• Use a plastic tool to lift and remove the old battery carefully, avoiding any damage to the surrounding components.
• Install the new battery, attaching the flex cable to the motherboard.
• Reassemble the phone by reversing the disassembly steps.

Replacing the Camera

• Power off the device and remove the SIM card and any memory cards.
• Use a plastic opening tool to carefully pry open the back cover.
• Unscrew the screws securing the frame and remove the frame carefully.
• Locate the camera module on the motherboard and disconnect its flex cable.
• Use tweezers to gently lift and remove the old camera module.
• Place the new camera module in the correct position and connect its flex cable.
• Reassemble the phone by reversing the disassembly steps.