Sony Ericsson WT19I spare parts

Technical Characteristics of Sony Ericsson WT19I Repuestos

The Sony Ericsson WT19I, also known as the Sony Ericsson Live with Walkman, is a popular model that can be repaired with specific replacement parts (repuestos). Here are the technical characteristics of some common repuestos for the Sony Ericsson WT19I:

Battery

Model: BA700

Capacity: 1200 mAh

Type: Lithium-Ion

Voltage: 3.7V

Display Screen

Type: TFT Capacitive Touchscreen

Size: 3.2 inches

Resolution: 320 x 480 pixels

Protection: Scratch-resistant glass

Camera Module

Rear Camera: 5 MP, autofocus, LED flash

Front Camera: VGA

Charging Port

Type: Micro USB

Instructions for Replacing Sony Ericsson WT19I Repuestos

Battery Replacement

• Power off the phone and remove the back cover.
• Remove the old battery by lifting it out from the bottom using the notch provided.
• Insert the new battery, ensuring the contacts align correctly.
• Replace the back cover and power on the phone to check if the replacement is successful.

Display Screen Replacement

• Power off the phone and remove the back cover and battery.
• Remove any screws securing the midframe with a small screwdriver.
• Carefully pry open the midframe using a plastic spudger.
• Detach the ribbon cables connecting the display to the motherboard.
• Remove the old display and replace it with the new one, connecting the ribbon cables properly.
• Reassemble the phone by following the disassembly steps in reverse order.
• Power on the phone to ensure the new display is functioning correctly.

Camera Module Replacement

• Power off the phone and remove the back cover and battery.
• Remove any screws securing the midframe and carefully pry it open using a plastic spudger.
• Locate the camera module and gently disconnect the ribbon cable attached to it.
• Remove the faulty camera module and replace it with the new one, ensuring it clicks into place.
• Reconnect the ribbon cable to the motherboard.
• Reassemble the phone and power it on to verify the camera functions.

Charging Port Replacement

• Power off the phone and remove the back cover, battery, and midframe.
• Locate the charging port on the motherboard.
• Desolder the faulty charging port using a soldering iron carefully.
• Solder the new charging port into place, ensuring all contacts are made correctly.
• Reassemble the phone and test the charging functionality to ensure the replacement is successful.