Sony Xperia 10 Plus spare parts

Technical Characteristics of Sony Xperia 10 Plus Repuestos

Screen

The Sony Xperia 10 Plus features a 6.5-inch Full HD+ display with a resolution of 1080 x 2520 pixels. The screen utilizes IPS LCD technology, which provides vibrant colors and wide viewing angles.

Battery

The Sony Xperia 10 Plus comes with a non-removable 3000mAh battery. It supports fast charging and provides up to 21 hours of talk time on a 3G network.

Camera

The device is equipped with a dual rear camera setup: a 12MP main sensor with an aperture of f/1.8 and an 8MP telephoto lens with an aperture of f/2.4. The front camera has an 8MP sensor with an aperture of f/2.0.

Processor and Memory

The Sony Xperia 10 Plus is powered by a Qualcomm Snapdragon 636 processor. It comes with 4GB of RAM and 64GB of internal storage, expandable via microSD up to 512GB.

Instructions on How to Replace Sony Xperia 10 Plus Repuestos

Required Tools and Materials

• Plastic opening tool
• Suction cup
• Phillips screwdriver
• SIM card eject tool
• Replacement parts (screen, battery, camera, etc.)
• Adhesive strips
• Hairdryer or heat gun (optional for screen replacement)

Steps to Replace the Screen

1. Power off the device completely.

2. Remove the SIM card tray using the SIM card eject tool.

3. If the screen is shattered, apply a piece of clear packing tape over the display to keep glass shards contained and to make it easier to lift.

4. Use a hairdryer or heat gun to gently heat the edges of the screen to weaken the adhesive.

5. Place the suction cup on the screen and lift gently to create a small gap.

6. Insert the plastic opening tool into the gap and carefully pry around the edges to release the adhesive. Take your time to avoid damaging internal components.

7. Once the screen is loose, carefully disconnect the screen's ribbon cable from the motherboard.

8. Attach the new screen's ribbon cable to the motherboard.

9. Press the new screen into place and ensure it is properly aligned.

10. Power on the device to test the new screen. Ensure touch functionality and display are working correctly.

11. If everything works correctly, power off the device and apply new adhesive strips around the edges of the screen.

12. Press the screen firmly to set the adhesive.

Steps to Replace the Battery

1. Follow steps 1-6 from the screen replacement guide to open the device.

2. Locate the battery and disconnect its connector from the motherboard.

3. Use the plastic opening tool to carefully pry the old battery out of its compartment. Be cautious not to bend or puncture the battery.

4. Remove any remaining adhesive from the battery compartment.

5. Place the new battery in the compartment and connect its connector to the motherboard.

6. Reseal the device by following steps 8-12 from the screen replacement guide.

Steps to Replace the Camera

1. Follow steps 1-6 from the screen replacement guide to open the device.

2. Locate the camera module and disconnect its connector from the motherboard.

3. Use the plastic opening tool to gently remove the camera module from its placement.

4. Place the new camera module in the same position and connect its ribbon cable to the motherboard.

5. Ensure the new camera module is securely in place.

6. Reseal the device by following steps 8-12 from the screen replacement guide.