Sony Xperia Active ST17 spare parts

Sony Xperia Active ST17 Technical Characteristics

The Sony Xperia Active ST17 is a durable smartphone designed for an active lifestyle. Below are its key technical characteristics:

Key Technical Specifications

• Display: 3.0 inches TFT capacitive touchscreen, 320 x 480 pixels
• Processor: 1 GHz Cortex-A8
• RAM: 512 MB
• Storage: 1 GB internal storage, expandable via microSD up to 32 GB
• Camera: 5 MP rear camera with LED flash and 720p video recording
• Battery: Li-Ion 1200 mAh battery
• Operating System: Android 2.3 (Gingerbread), upgradable to 4.0 (Ice Cream Sandwich)
• Connectivity: Wi-Fi 802.11 b/g/n, Bluetooth 2.1, GPS
• Water and Dust Resistant: IP67 certified

Instructions for Replacing Sony Xperia Active ST17 Parts

Replacing parts on the Sony Xperia Active ST17 requires careful attention to detail and a steady hand. Below are the detailed instructions for common part replacements:

Replacing the Battery

• 1. Power off your Xperia Active ST17.
• 2. Remove the back cover by prying it open from the bottom edge.
• 3. Lift the battery out from its compartment.
• 4. Place the new battery in the compartment, ensuring proper alignment.
• 5. Replace the back cover, making sure it snaps into place securely.
• 6. Power on the device to check if the new battery is recognized.

Replacing the Screen

• 1. Power off your smartphone and remove the battery.
• 2. Remove the microSD and SIM cards if inserted.
• 3. Use a plastic opening tool to gently pry around the edges of the display to loosen it.
• 4. Carefully disconnect the display from the motherboard by lifting the connector tab.
• 5. Remove the broken screen and replace it with the new screen, connecting it securely to the motherboard.
• 6. Press the new display into place, making sure it is flush with the sides of the smartphone.
• 7. Reinsert the battery, microSD, and SIM cards, then replace the back cover.
• 8. Power on the device to ensure the new screen functions correctly.

Replacing the Rear Camera

• 1. Power off the device and remove the back cover, battery, microSD, and SIM cards.
• 2. Remove any screws securing the camera module to the frame.
• 3. Carefully disconnect the camera module from the motherboard by releasing the connector.
• 4. Remove the faulty camera and replace it with the new one, ensuring it is properly aligned and connected.
• 5. Resecure the camera module with screws, if applicable.
• 6. Replace the battery, microSD, and SIM cards, then reattach the back cover.
• 7. Power on the device and test the camera to confirm it is functioning correctly.

Replacing the MicroSD/SIM Card Slot

• 1. Power off the device and remove the back cover, battery, microSD, and SIM cards.
• 2. Locate the microSD/SIM card slot on the motherboard.
• 3. Use a small Phillips screwdriver to remove any screws securing the slot to the motherboard.
• 4. Carefully disconnect the slot module from the motherboard.
• 5. Remove the defective slot and replace it with the new one, ensuring proper alignment and secure connection.
• 6. Reattach any screws that hold the slot module in place.
• 7. Replace the battery, microSD, and SIM cards, then reattach the back cover.
• 8. Power on the device, insert a microSD and SIM card, and ensure they are recognized by the smartphone.