Sony Xperia TX LT29I spare parts

Sony Xperia TX LT29i Technical Characteristics

Technical Specifications

• Display: 4.55 inches, 720 x 1280 pixels
• Processor: Dual-core 1.5 GHz Krait
• RAM: 1 GB
• Storage: 16 GB (expandable via microSD)
• Rear Camera: 13 MP, LED flash
• Front Camera: 1.3 MP
• Battery: 1750 mAh
• Operating System: Android 4.0.4 (upgradable)
• Connectivity: Wi-Fi, Bluetooth 3.1, NFC, microUSB 2.0

Instructions to Replace Sony Xperia TX LT29i Parts

Step-by-Step Replacement Guide

Before starting, make sure you have all the necessary tools and replacement parts ready. Recommended tools include a plastic pry tool, a small Phillips screwdriver, tweezers, and a suction cup.

Battery Replacement

• 1. Turn off your Sony Xperia TX LT29i and remove any cases or protective covers.
• 2. Using a small Phillips screwdriver, remove the screws securing the back cover.
• 3. Gently insert a plastic pry tool between the back cover and the phone frame to release the clips. Carefully remove the back cover.
• 4. Disconnect the battery connector using tweezers or your fingers.
• 5. Carefully lift the battery out of its compartment using the plastic pry tool.
• 6. Place the new battery into the compartment, ensuring it is properly aligned.
• 7. Reconnect the battery connector.
• 8. Replace the back cover and secure it with the screws.
• 9. Turn on your phone to ensure the battery replacement was successful.

Display Replacement

• 1. Power off the device and remove the back cover as described in the battery replacement instructions.
• 2. Disconnect the battery to prevent any electrical issues during repair.
• 3. Use a suction cup to lift the front panel slightly, then insert a plastic pry tool to separate the screen from the frame.
• 4. Carefully disconnect the display connectors and remove the old display panel.
• 5. Attach the new display panel by connecting the display connectors.
• 6. Place the new display into the frame, ensuring it fits snugly and securely.
• 7. Reconnect the battery, replace the back cover, and secure it with screws.
• 8. Power on the device to check if the new display is functioning correctly.

Note: Perform all replacements in a clean, static-free environment. If you are unsure about any step, consult with a professional technician to avoid damaging your device.