Sony Xperia Z5 Premium E6853 spare parts

Technical Characteristics of Sony Xperia Z5 Premium E6853 Repuestos

The Sony Xperia Z5 Premium E6853 is equipped with high-quality components that ensure optimal performance and user experience. Some of the key technical specifications of its repuestos include:

Display

• Type: IPS LCD capacitive touchscreen
• Size: 5.5 inches, 98.6 cm² (~70.4% screen-to-body ratio)
• Resolution: 2160 x 3840 pixels, 16:9 ratio (~806 ppi density)
• Protection: Scratch-resistant glass, oleophobic coating

Battery

• Type: Non-removable Li-Ion 3430 mAh battery

Camera

• Main Camera: 23 MP, f/2.0, 24mm (wide), 1/2.3", PDAF
• Features: LED flash, panorama, HDR
• Video: 4K@30fps, 1080p@60fps, 720p@120fps, HDR

Memory

• Internal: 32GB 3GB RAM
• Card slot: microSDXC (uses shared SIM slot)

Instructions for Replacing Sony Xperia Z5 Premium E6853 Repuestos

Tools Required

• Small Phillips screwdriver
• Plastic opening tools
• Suction cup
• Tweezers
• Adhesive strips
• Heat gun or hairdryer

Step-by-Step Instructions

1. Power Off

Ensure the device is powered off before starting the replacement process to avoid any damage or short circuits.

2. Back Cover Removal

• Use the heat gun or hairdryer to gently heat the edges of the back cover. This will soften the adhesive.
• Place the suction cup on the heated back cover and gently pull to create a small gap.
• Insert a plastic opening tool into the gap and carefully slide it around the edges to release the adhesive. Remove the back cover.

3. Disconnect the Battery

• Locate the battery connector and use the plastic opening tool to disconnect it from the motherboard.
• Remove any adhesive or screws securing the battery in place.
• Carefully lift and remove the battery from the device.

4. Replace the Desired Component

• If replacing the display, remove the screws and connectors securing it to the frame and attach the new display.
• If replacing the camera, disconnect the camera module from the motherboard and replace it with the new camera module.
• Follow similar steps for other components such as the charging port, speakers, or buttons.

5. Reassemble the Device

• Reconnect the battery to the motherboard.
• Place the back cover back onto the device. Use new adhesive strips if necessary to secure the back cover.
• Press down firmly around the edges to ensure the back cover adheres properly.

6. Power On

Power on the device to ensure all replaced components are functioning correctly.

Note

These instructions are intended as a general guide. Always consult the specific repair manual for your device model and exercise caution when performing any repairs.