TP-Link Neffos X9 spare parts

TP-Link Neffos X9 Repuestos Technical Characteristics

The TP-Link Neffos X9 is a robust and efficient smartphone. When servicing this device, you need to understand its key technical specifications.

• Display: 5.99" IPS LCD, 720 x 1440 pixels, 18:9 ratio (~269 ppi density).
• CPU: Octa-core 4x1.5 GHz Cortex-A53 & 4x1.0 GHz Cortex-A53.
• Storage: 16GB 2GB RAM, 32GB 3GB RAM, expandable via Micro SD, up to 128 GB (uses shared SIM slot).
• Camera: Dual, 13 MP, f/2.0, AF and 5 MP, f/2.2.
• Battery: Non-removable Li-Po 3060 mAh battery.
• OS: Android 8.1 (Oreo), Funtouch 4.

Instructions to Replace TP-Link Neffos X9 Repuestos

Tools Needed

• Small Phillips screwdriver
• Plastic opening tool
• Spudger
• Tweezers

Steps to Follow

Before you begin, ensure the device is powered off and disconnected from any power source.

• Start by removing the back cover of the device using the plastic opening tool. Insert the tool in the small gap between the back cover and the main body of the device and slide it around the device to unclip the latches.
• Unscrew all visible screws using the Phillips screwdriver.
• Remove the protective plate which covers the battery and internal parts using the plastic opening tool.
• Disconnect the battery connector and the connectors for the front and back camera using the spudger.
• Carefully lift the battery out of the device. If it's firmly glued in place, use a heated iOpener or heat pad to soften the adhesive before lifting with the spudger.
• Replace the faulty part with the new one. If the replaced part is a battery, ensure it's properly glued in place.
• Connect all disconnected connectors and replace the protective plate back in place. Secure it by screwing the screws back in.
• Replace the back cover and ensure it's properly clipped in place.
• Power on the device to ensure everything is working fine.

Note: Always exercise caution when handling electronic components to prevent any damage.