Ulefone Note 8P spare parts

    There are 15 products.

    Technical Characteristics of Ulefone Note 8P Repuestos

    The Ulefone Note 8P Repuestos comprises of several components. Below are the technical characteristics of these components:

    • Replacement Screen: This is a high-quality LCD, 960 x 480 pixels, 5.5 inches display.
    • Battery Replacement: The replacement battery for the Ulefone Note 8P has a capac...

    Technical Characteristics of Ulefone Note 8P Repuestos

    The Ulefone Note 8P Repuestos comprises of several components. Below are the technical characteristics of these components:

    • Replacement Screen: This is a high-quality LCD, 960 x 480 pixels, 5.5 inches display.
    • Battery Replacement: The replacement battery for the Ulefone Note 8P has a capacity of 2700mAh.
    • Replacement Camera: The rear camera is an 8 MP with a secondary 2 MP camera, while the front camera is a 5 MP.
    • Replacement Motherboard: The motherboard carries a MediaTek MT6737 quad-core chipset, 2GB RAM, and 16GB storage.

    Instructions for Replacing Ulefone Note 8P Repuestos

    Materials Needed

    • Replacement parts
    • Small Phillips screwdriver
    • Pry tool or spudger

    Procedure

    Step 1: Power off your device

    Always ensure your phone is powered off before you start to avoid any short circuits during the process.

    Step 2: Remove the back cover

    Use the pry tool to gently lift the back cover from the bottom of the device. Take care not to damage the plastic clips holding the cover in place.

    Step 3: Remove the Battery

    Unscrew the screws holding the battery in place, then use the pry tool to lift the battery out.

    Step 4: Replace the damaged component

    Proceed to replace the damaged component, whether it's the screen, camera, or motherboard. Ensure each of the parts fits into its specific place properly.

    Step 5: Reassemble the device

    Once the new component is securely in place, replace the battery and screw it into place. Finally, replace the back cover by pressing it into place until all clips click securely.

    Power the device back on to test if the replacement was successful.

    Less
    More
    Showing 1 - 15 of 15 items