Ulephone Power 2

Ulephone Power 2 Technical Specifications

Ulephone Power 2 is a powerful smartphone with numerous technical highlights that set it apart. The key characteristics include:

• Operating System: Android 7.0
• Screen size: 5.5 inch Full HD Display
• Resolution: 1920 x 1080 pixels
• CPU: MTK6750T Octa Core 1.5GHz
• RAM: 4GB
• Storage: 64GB (expandable up to 256GB)
• Camera: 13MP rear camera and 8MP front camera
• Battery: 6050mAh (Non-removable)

Instructions for Replacing Ulephone Power 2

Note: Proceed with caution as incorrectly handling parts can lead to permanent damage.

Tools Needed

• Small Phillips Screwdriver
• Opening tool or Thin Pry tool

Steps to Replace Ulephone Power 2

Step 1: Power off your Ulephone Power 2 device to avoid damage.

Step 2: Remove the SIM card tray from the side of the phone.

Step 3: Using the small Phillips screwdriver, remove the two screws at the bottom of the device located either side of the USB charging port.

Step 4: Use the opening tool or thin pry tool to gently lift the back cover starting from the charging port area and work your way around the phone.

Step 5: After carefully removing the back cover, unscrew the shielding covering the battery connector.

Step 6: Disconnect the battery from the motherboard by detaching the connector. Make sure you do this gently to not cause damage.

Step 7: Now, remove the old battery and replace it with the new one. Gently connect the battery to the motherboard.

Step 8: Replace the shield covering the battery connector and screw it back into place.

Step 9: Snap the back cover back into place and reinsert the two screws at the bottom of the device.

Step 10: Finally, reinsert the SIM card tray.

You have now successfully replaced the battery of the Ulephone Power 2. Power on the device to check functionality.